• -$10.00
Chrysler LX 300 - Repair, Service and Maintenance Manual
search
  • Chrysler LX 300 - Repair, Service and Maintenance Manual

Chrysler LX 300 - Repair, Service and Maintenance Manual

$29.95
$19.95 Save $10.00
No tax
Quantity

YOUTUBE Official Channel @SoloPDFcom (+18,000 subs). Trusted by mechanics worldwide using professional workshop manuals and wiring diagrams.

Chrysler LX 300 - Repair, Service and Maintenance Manual

Digital technical documentation with sections on FOREWORD, GROUP TAB LOCATOR, IN-INTRODUCTION. Review the complete contents below for the systems and procedures covered.

Manual contents

  • SERVICE MANUAL
  • - FOREWORD
  • - GROUP TAB LOCATOR
  • - IN-INTRODUCTION
  • - Body code plate
  • - Description
  • - Location and decoding
  • - Body code plate line 3
  • - Body code plate – line 2
  • - Body code plate line 1
  • - If two body code plates are required
  • - Fastener identification
  • - Description
  • - Fastener usage
  • - Description
  • - Fastener usage
  • - Threaded hole repair
  • - International symbols
  • - Description
  • - Manufacture plate
  • - Description
  • - Metric system
  • - Description
  • - Torque references
  • - Description
  • - Veci label
  • - Description
  • - Vehicle identification number
  • - Description
  • - Vehicle certification label
  • - Description
  • - 0-LUBRICATION & MAINTENANCE
  • - Fluid types
  • - Description
  • - Engine oil and lubricants
  • - Api service grade certified
  • - Sae viscosity
  • - Energy conserving oil
  • - Container identification
  • - Synthetic engine oils
  • - Engine oil additives/supplements
  • - Gear lubricants
  • - Lubricants and greases
  • - Specialized lubricants and oils
  • - Description - axle
  • - Automatic transmission fluid
  • - Fluid additives
  • - Operation
  • - Automatic transmission fluid
  • - Fluid capacities
  • - Specifications - fluid capacities
  • - Fluid fill/check locations
  • - Description
  • - Hoisting
  • - Standard procedure - hoisting
  • - International symbols
  • - Description
  • - Jump starting
  • - Standard procedure
  • - Jump starting
  • - To jump start a disabled vehicle:
  • - Disconnect cable clamps as follows:
  • - Lubrication points
  • - Description
  • - Maintenance schedules
  • - Description
  • - Description - sedan
  • - Schedule b
  • - Schedule a
  • - Description - wagon
  • - Schedule b
  • - Schedule a
  • - Description - export
  • - Schedule a
  • - Schedule b
  • - Parts & lubricant recommendation
  • - Description
  • - Description - fluid types
  • - Sae viscosity rating
  • - Api quality classification
  • - Gear lubricants
  • - Lubricants and greases
  • - Specialized lubricants and oils
  • - Lubricant recommendations
  • - Lubricants and greases
  • - Specialized lubricants and oils
  • - Chassis
  • - Body
  • - Towing
  • - Standard procedure - towing
  • - Warnings and cautions
  • - Recommended towing equipment
  • - Ground clearance
  • - Locked vehicle towing
  • - Flat bed towing tie downs
  • - Towing – front wheel drive
  • - Towing – all wheel drive
  • - All transmissions
  • - Without the ignition key
  • - Towing this vehicle behind another vehicle (flat towing with all four wheels on the ground)
  • - Flat towing with tow bar
  • - Towing this vehicle behind another vehicle with a tow dolley
  • - 2-SUSPENSION
  • - Suspension
  • - Standard procedure
  • - Lubrication
  • - Front
  • - Description
  • - Specifications
  • - Front suspension fastener torque
  • - Hub / bearing
  • - Description
  • - Diagnosis and testing
  • - Hub and bearing
  • - Removal
  • - Installation
  • - Knuckle
  • - Removal
  • - Disassembly - ball joint
  • - Assembly - ball joint
  • - Installation
  • - Ball joint - lower
  • - Description
  • - Diagnosis and testing
  • - Lower ball joint
  • - Arm - lower control
  • - Removal
  • - Installation
  • - Shock assembly
  • - Removal
  • - Disassembly
  • - Assembly
  • - Installation
  • - Bar - stabilizer
  • - Removal
  • - Installation
  • - Strut - tension
  • - Removal
  • - Installation
  • - Ball joint - upper
  • - Description
  • - Diagnosis and testing
  • - Upper ball joint
  • - Arm - upper control
  • - Removal
  • - Installation
  • - Rear
  • - Description
  • - Specifications
  • - Rear suspension fastener torque
  • - Special tools
  • - Rear suspension
  • - Hub / bearing
  • - Description
  • - Diagnosis and testing
  • - Hub and bearing
  • - Removal
  • - Installation
  • - Knuckle
  • - Removal
  • - Installation
  • - Camber link
  • - Removal
  • - Installation
  • - Compression link
  • - Removal
  • - Installation
  • - Spring link
  • - Removal
  • - Installation
  • - Tension link
  • - Removal
  • - Installation
  • - Toe link
  • - Removal
  • - Left link
  • - Right link
  • - Installation
  • - Left link
  • - Right link
  • - Shock absorber
  • - Description
  • - Removal
  • - Standard
  • - Load-leveling
  • - Installation
  • - Standard
  • - Load-leveling
  • - Spring
  • - Removal
  • - Installation
  • - Bar - stabilizer
  • - Removal
  • - Installation
  • - 3-DIFFERENTIAL & DRIVELINE
  • - Propeller shaft
  • - Description
  • - Removal
  • - Coupler/damper service
  • - Installation
  • - Coupler/damper service
  • - Specifications – propeller shaft
  • - Special tools – propeller shaft
  • - Center bearing
  • - Removal
  • - Installation
  • - Half shaft - rear
  • - Description
  • - Diagnosis and testing - half shaft
  • - Vehicle inspection
  • - Noise and/or vibration in turns
  • - Clunking noise during acceleration
  • - Shudder or vibration during acceleration
  • - Vibration at highway speeds
  • - Removal
  • - Installation
  • - Specifications - torque
  • - Special tools
  • - Rear axle - 198rii
  • - Description
  • - Axle identification
  • - Diagnosis and testing
  • - Gear noise
  • - Bearing noise
  • - Low speed knock
  • - Vibration
  • - Driveline snap
  • - Standard procedure - fluid drain and fill
  • - Removal
  • - Installation
  • - Adjustments
  • - Adjustment - pinion depth
  • - Pinion depth variance
  • - Pinion depth measurement
  • - Adjustment - side bearing preload and ring gear backlash
  • - Differential side bearing preload measurement/correction
  • - Ring gear backlash measurement/correction
  • - Gear contact pattern
  • - Specifications - 198 rii axle
  • - Special tools - 198 rii axle
  • - Axle shaft seals
  • - Removal
  • - Installation
  • - Pinion seal
  • - Removal
  • - Installation
  • - Differential
  • - Removal
  • - Disassembly
  • - Assembly
  • - Installation
  • - Differential case bearings
  • - Removal
  • - Installation
  • - Differential cover
  • - Removal
  • - Installation
  • - Pinion gear/ring gear
  • - Removal
  • - Installation
  • - Rear axle - 210rii
  • - Description
  • - Axle identification
  • - Diagnosis and testing
  • - Gear noise
  • - Bearing noise
  • - Low speed knock
  • - Vibration
  • - Driveline snap
  • - Standard procedure - fluid drain and fill
  • - Removal
  • - Installation
  • - Adjustments
  • - Adjustment - pinion depth measurement
  • - Pinion depth variance
  • - Pinion depth measurement
  • - Adjustment — side bearing preload and ring gear backlash
  • - Differential side bearing preload measurement/correction
  • - Ring gear backlash measurement/correction
  • - Gear contact pattern
  • - Specifications - 210 mm rii axle
  • - Special tools - 210 rii axle
  • - Axle shaft seals
  • - Removal
  • - Installation
  • - Pinion seal/flange
  • - Removal
  • - Installation
  • - Differential
  • - Removal
  • - Disassembly
  • - Assembly
  • - Installation
  • - Differential case bearings
  • - Removal
  • - Installation
  • - Differential cover
  • - Removal
  • - Installation
  • - Pinion gear/ring gear
  • - Removal
  • - Installation
  • - 5-BRAKES
  • - Brakes - base
  • - Description - base brakes
  • - Warning
  • - Caution
  • - Standard procedure
  • - Base brake bleeding
  • - Pressure bleeding method
  • - Manual bleeding method
  • - Specifications
  • - Brake fastener torque
  • - Special tools
  • - Base brake system
  • - Switch-adjustable pedals
  • - Description
  • - Removal
  • - Installation
  • - Sensor - brake fluid level
  • - Removal
  • - Installation
  • - Hydraulic/mechanical
  • - Description - disc brakes
  • - Pads - front brake
  • - Removal
  • - Cleaning
  • - Installation
  • - Pads - rear brake
  • - Removal
  • - Cleaning
  • - Installation
  • - Caliper - front single piston disc brake
  • - Removal
  • - Disassembly
  • - Cleaning
  • - Inspection
  • - Assembly
  • - Installation
  • - Caliper - front twin piston disc brake
  • - Removal
  • - Disassembly
  • - Cleaning
  • - Inspection
  • - Assembly
  • - Installation
  • - Caliper - rear disc brake
  • - Removal
  • - Disassembly
  • - Cleaning
  • - Inspection
  • - Assembly
  • - Installation
  • - Fluid
  • - Diagnosis and testing
  • - Brake fluid contamination
  • - Standard procedure0 - 2 lx
  • - Brake fluid level checking
  • - Specifications
  • - Brake fluid
  • - Reservoir - master cylinder fluid
  • - Removal
  • - Installation
  • - Junction block
  • - Description
  • - Operation
  • - Removal
  • - Installation
  • - Master cylinder
  • - Standard procedure
  • - Master cylinder bleeding
  • - Removal
  • - Disassembly
  • - Assembly
  • - Installation
  • - Pedal
  • - Removal
  • - Installation
  • - Pedal - adjustable brake
  • - Standard procedure
  • - Adjustable pedals sychronization
  • - Removal
  • - Installation
  • - Booster - power brake
  • - Removal
  • - Installation
  • - Valve - proportioning
  • - Description
  • - Operation
  • - Rotor
  • - Diagnosis and testing
  • - Brake rotor
  • - Braking surface inspection
  • - Rotor minimum thickness
  • - Rotor thickness variation
  • - Rotor runout
  • - Standard procedure
  • - Brake rotor machining
  • - Removal
  • - Front
  • - Rear
  • - Installation
  • - Front
  • - Rear
  • - Specifications
  • - Brake rotor
  • - Tubes/hoses
  • - Description
  • - Inspection
  • - Cable - parking brake front
  • - Removal
  • - Installation
  • - Cable - parking brake rear
  • - Removal
  • - Installation
  • - Lever - parking brake
  • - Removal
  • - Installation
  • - Shoe and lining - parking brake
  • - Removal
  • - Installation
  • - Adjustments
  • - Parking brake shoe adjustment
  • - Brakes - abs electrical diagnostics
  • - Diagnosis and testing
  • - Aps-intermittent condition
  • - B1d56–adjustable pedal sensor circuit low
  • - B1d57–adjustable pedal sensor circuit high
  • - B1d5b–adjustable pedal switch circuit performance
  • - B1d5c–adjustable pedal switch circuit stuck forward
  • - B1d5d–adjustable pedal switch circuit stuck rearward
  • - B1d67–adjustable pedal control circuit performance
  • - Aps verification test – ver 1
  • - Abs-intermittent condition
  • - C100a–left front wheel speed sensor circuit
  • - C1011-left front wheel speed sensor signal erratic performance
  • - C1014-left front wheel speed comparative performance
  • - C1015–right front wheel speed sensor circuit
  • - C101c-right front wheel speed sensor signal erratic performance
  • - C101f-right front wheel speed comparative performance
  • - C1020–left rear wheel speed sensor circuit
  • - C1027-left rear wheel speed sensor signal erratic performance
  • - C102a-left rear wheel speed comparative performance
  • - C102b–right rear wheel speed sensor circuit
  • - C1032-right rear wheel speed sensor signal erratic performance
  • - C1035-right rear wheel speed comparative performance
  • - C1041-left front tone wheel performance
  • - C1042-right front tone wheel performance
  • - C1043-left rear tone wheel performance
  • - C1044-right rear tone wheel performance
  • - C1046-left front wheel pressure phase monitoring
  • - C1047-right front wheel pressure phase monitoring
  • - C1048-left rear wheel pressure phase monitoring
  • - C1049-right rear wheel pressure phase monitoring
  • - C1073-abs pump motor control circuit
  • - C1078-tire revolutions range performance
  • - C107c-brake pedal switch 1/2 stuck
  • - C107d-brake pedal switch 1/2 correlation
  • - C1219-steering angle sensor erratic performance
  • - C121a-steering angle sensor not initialized
  • - C121c-torque request signal denied
  • - C121d-brake pressure sensor circuit
  • - C121e-brake pressure sensor comparative performance
  • - C1221-brake pressure sensor/accelerator pedal position sensor correlation
  • - C1222-brake pedal travel sensor/brake pressure sensor correlation
  • - C1227-brake pedal travel sensor circuit performance
  • - C1228-brake pedal travel sensor circuit low
  • - C1229-brake pedal travel sensor circuit high
  • - C122a-brake pedal force switch circuit
  • - C122b-brake pedal force switch circuit performance
  • - C122c-active brake booster control circuit supply voltage
  • - C122d-active brake booster control circuit
  • - C123a-esp system sensors calibration
  • - C123b-esp system control too long
  • - C123c-dynamics sensor mounting/installation performance
  • - C2100-battery voltage low
  • - C2101-battery voltage high
  • - C2111-sensor supply voltage circuit low
  • - C2112-sensor supply voltage circuit high
  • - C2114-dynamics sensor supply voltage low
  • - C2115-dynamics sensor supply voltage high
  • - C2116-abs pump motor supply low voltage
  • - C2200-anti-lock brake module internal
  • - C2202-original vin mismatch/missing
  • - C2204-dynamics sensor internal
  • - C2205-steering angle sensor internal
  • - C2206-vehicle configuration mismatch
  • - U0002-can c bus off performance
  • - U0100-lost communication with ecm/pcm
  • - U0101-lost communication with tcm
  • - U0125-lost communication with dynamics sensor
  • - U0126-lost communication with steering angle sensor
  • - U0141–lost communication with front control module
  • - U0401-implausible data received from ecm/pcm
  • - U0402-implausible data received from tcm
  • - U1003-esp can c bus performance
  • - U1004-can c bus transmit performance
  • - U140e-implausible vehicle configuration data received
  • - U1501-implausible message data length received from pcm
  • - U1502-implausible message data length received from tcm
  • - U1503-implausible message data length received from fcm
  • - U1504-implausible message data length received from steering angle sensor
  • - Abs verification test — ver 1
  • - C230d-trac/esp off switch input circuit low
  • - C1017-right front wheel speed sensor circuit low
  • - C1018-right front wheel speed sensor circuit high
  • - B1d4f-adjustable pedal inhibit circuit low
  • - B1d50-adjustable pedal inhibit circuit high
  • - B1d51-adjustable pedal inhibit circuit open
  • - Schematics and diagrams
  • - Brakes - abs - service information
  • - Description
  • - Antilock brake system with traction control
  • - Abs
  • - All-speed traction control
  • - Electronic stability program
  • - Electronic variable brake proportioning
  • - Operation
  • - Antilock brake system with traction control
  • - Abs
  • - All-speed traction control
  • - Electronic stability program
  • - Electronic variable brake proportioning
  • - Standard procedure
  • - Antilock brake system bleeding
  • - Bleeding
  • - Sensor-dynamics
  • - Description
  • - Removal
  • - Installation
  • - Sensor - brake pressure
  • - Removal
  • - Installation
  • - Sensor - travel
  • - Removal
  • - Installation
  • - Sensor - steering angle
  • - Removal
  • - Installation
  • - Sensor - front wheel speed
  • - Removal
  • - Installation
  • - Sensor - rear wheel speed
  • - Removal
  • - Installation
  • - Switch - esp
  • - Description
  • - Removal
  • - Installation
  • - Switch - traction control
  • - Description
  • - Removal
  • - Installation
  • - Booster - active brake
  • - Description
  • - Hcu (hydraulic control unit)
  • - Removal
  • - Installation
  • - Icu (integrated control unit)
  • - Removal
  • - Disassembly
  • - Assembly
  • - Installation
  • - 7-COOLING
  • - Cooling
  • - Description
  • - Operation
  • - Diagnosis and testing
  • - On-board diagnostics (obd)
  • - Cooling system related diagnostics
  • - Accessing diagnostic trouble codes
  • - Erasing trouble codes
  • - Cooling system - testing for leaks
  • - Ultraviolet light method
  • - Pressure tester method
  • - Internal leakage inspection
  • - Combustion leakage test - without pressure tester
  • - Preliminary checks
  • - Engine cooling system overheating
  • - Standard procedure
  • - Draining cooling system - all engines
  • - Cooling system filling
  • - Adding additional coolant
  • - Coolant level check
  • - Cooling system cleaning/reverse flushing
  • - Cleaning
  • - Reverse flushing
  • - Reverse flushing radiator
  • - Reverse flushing engine
  • - Chemical cleaning
  • - Specifications
  • - Torque
  • - Fill volumes
  • - Special tools
  • - Cooling
  • - Accessory drive
  • - Tensioners-belt
  • - Description
  • - Operation
  • - Removal
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Installation
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Belts-drive
  • - Diagnosis and testing
  • - Accessory drive belt
  • - Visual diagnosis
  • - Noise diagnosis
  • - Removal
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Installation
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Idler pulley
  • - Removal
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Installation
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Engine
  • - Coolant
  • - Description
  • - Engine coolant
  • - Ethylene-glycol mixtures
  • - Propylene-glycol mixtures
  • - Hoat coolant
  • - Coolant performance
  • - Coolant selection and additives
  • - Operation
  • - Diagnosis and testing
  • - Coolant concentration testing
  • - Standard procedure - coolant service
  • - Housing-coolant outlet - 2.7l
  • - Removal
  • - Installation
  • - Coolant recovery container
  • - Removal
  • - Installation
  • - Engine block heater
  • - Description
  • - Operation
  • - Diagnosis and testing
  • - Engine block heater
  • - Removal
  • - Installation
  • - Engine coolant temp sensor
  • - Removal
  • - 5.7l v-8
  • - 3.5l v6
  • - 2.7l v6
  • - Installation
  • - 5.7l v-8
  • - 3.5l v6
  • - 2.7l v6
  • - Engine coolant thermostat
  • - Description
  • - Operation
  • - Diagnosis and testing
  • - Engine coolant thermostat
  • - Removal
  • - 2.7l engine
  • - 5.7l engine
  • - Installation
  • - 2.7l engine
  • - 5.7l engine
  • - Heater supply tube
  • - Removal
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Installation
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Radiator
  • - Removal
  • - Cleaning
  • - Inspection
  • - Installation
  • - Radiator fan
  • - Removal
  • - Installation
  • - Cap-radiator pressure
  • - Description
  • - Operation
  • - Diagnosis and testing
  • - Radiator cap-to-filler neck seal
  • - Radiator cap
  • - Cleaning
  • - Inspection
  • - Water pump
  • - Description
  • - Removal
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine
  • - Inspection - 2.7l
  • - Installation
  • - 2.7l engine
  • - 3.5l engine
  • - 5.7l engine0 - 4 lx
  • - 8A-AUDIO/VIDEO
  • - Audio - electrical diagnostics
  • - Diagnosis and testing
  • - B210d-battery voltage low
  • - B210e-battery voltage high
  • - B221f-amplifier internal
  • - B1488–cabin eq mismatch performance
  • - B1460-channel 1 audio speaker output circuit performance
  • - B1461-channel 1 audio speaker output circuit low
  • - B1462-channel 1 audio speaker output circuit high
  • - B1463-channel 1 audio speaker output circuit open
  • - B1464-channel 1 audio speaker output circuit shorted together
  • - B1465-channel 2 audio speaker output circuit performance
  • - B1466-channel 2 audio speaker output circuit low
  • - B1467-channel 2 audio speaker output circuit high
  • - B1468-channel 2 audio speaker output circuit open
  • - B1469-channel 2 audio speaker output circuit shorted together
  • - B146a-channel 3 audio speaker output circuit performance
  • - B146b-channel 3 audio speaker output circuit low
  • - B146c-channel 3 audio speaker output circuit high
  • - B146d-channel 3 audio speaker output circuit open
  • - B146e-channel 3 audio speaker output circuit shorted together
  • - B146f-channel 4 audio speaker output circuit performance
  • - B1470-channel 4 audio speaker output circuit low
  • - B1471-channel 4 audio speaker output circuit high
  • - B1472-channel 4 audio speaker output circuit open
  • - B1473-channel 4 audio speaker output circuit shorted together
  • - B1474-channel 5 audio speaker output circuit performance
  • - B1475-channel 5 audio speaker output circuit low
  • - B1476-channel 5 audio speaker output circuit high
  • - B1477-channel 5 audio speaker output circuit open
  • - B1478-channel 5 audio speaker output circuit shorted together
  • - B1479-channel 6 audio speaker output circuit performance
  • - B147a-channel 6 audio speaker output circuit low
  • - B147b-channel 6 audio speaker output circuit high
  • - B147c-channel 6 audio speaker output circuit open
  • - B147d-channel 6 audio speaker output circuit shorted together
  • - B147e-channel 7 audio speaker output circuit performance
  • - B147f-channel 7 audio speaker output circuit low
  • - B1480-channel 7 audio speaker output circuit high
  • - B1481-channel 7 audio speaker output circuit open
  • - B1482-channel 7 audio speaker output circuit shorted together
  • - B1483-channel 8 audio speaker output circuit performance
  • - U0019–can b bus
  • - U0020-can b bus off performance
  • - U0141–lost communication with front control module
  • AND MORE.....