• -$10.00
Ducati Multistrada 1200 ABS - Service Manual - Repair Manual
search
  • Ducati Multistrada 1200 ABS - Service Manual - Repair Manual

Ducati Multistrada 1200 ABS - Service Manual - Repair Manual

$29.95
$19.95 Save $10.00
No tax
Quantity

YOUTUBE Official Channel @SoloPDFcom (+18,000 subs). Trusted by mechanics worldwide using professional workshop manuals and wiring diagrams.

Ducati Multistrada 1200 ABS - Service Manual - Repair Manual

This digital manual for Ducati Multistrada 1200 ABS includes sections on Product specifications, General maintenance instructions, MTS(E4).02 - MODEL-SPECIFIC INFORMATION. The complete contents are listed below.

Manual contents

  • MTS(E4).01 - GENERAL
  • SYMBOLS - ABBREVIATIONS - REFERENCES
  • - Product specifications
  • DANGEROUS PRODUCTS - WARNINGS
  • - General maintenance instructions
  • - General safety rules
  • MTS(E4).02 - MODEL-SPECIFIC INFORMATION
  • MODEL IDENTIFICATION
  • - Identification data
  • MTS(E4).03 - TECHNICAL DATA
  • TECHNICAL SPECIFICATIONS
  • - Lights/instrument panel
  • - Injection system
  • - Fuel system
  • - Injection-ignition system
  • - Charging system/generator
  • - Hydraulic brakes
  • - Rear suspension
  • - Rear wheel
  • - Front suspension
  • - Front wheel
  • - Cooling system
  • - Gearbox
  • - Cylinder/piston
  • - Crankshaft
  • - Timing system/valves
  • - Transmission
  • - Colours
  • - General
  • OVERALL DIMENSIONS
  • - Dimensions
  • FUEL, LUBRICANTS AND OTHER FLUIDS
  • - Fuel, lubricants and other fluids
  • TIGHTENING TORQUE SETTINGS
  • - Frame tightening torque values
  • - Engine tightening torque values
  • SERVICE TOOLS
  • - Diagnosis special tools
  • - Frame special tools
  • - Engine special tools
  • MTS(E4).04 - MAINTENANCE OPERATIONS
  • VEHICLE PRE-DELIVERY
  • - Vehicle pre-delivery
  • SCHEDULED MAINTENANCE CHART
  • - Operations-be carried out by the customer
  • - Operations-be carried out by the dealer
  • MAINTENANCE OPERATIONS
  • - Filling the clutch hydraulic circuit
  • - Draining the clutch hydraulic circuit
  • - Changing the clutch fluid
  • - Adjusting the rear shock absorber
  • - Front fork adjustment
  • - Adjusting the position of the gearchange pedal and rear brake pedal
  • - Adjusting the front brake control lever
  • - Checking rear brake pad wear and replacing brake pads
  • - Checking front brake pad wear and replacing brake pads
  • - Adjusting the chain tension
  • - Adjusting the steering head bearing play
  • - Changing the fluid in the rear brake system
  • - Changing the fluid in the front brake system
  • - Changing the coolant
  • - Check coolant level
  • - Changing and cleaning the air filters
  • - Changing the spark plugs
  • - Change timing belts
  • - Checking valve clearance
  • - Changing the engine oil and filter cartridge
  • - Check engine oil level
  • MTS(E4).05 - FAIRINGS
  • REAR-VIEW MIRRORS
  • - Refitting the headlight fairing
  • - Removing the headlight fairing
  • - Refitting the panel
  • - Removing the panel
  • FAIRINGS
  • - Refitting the tank fairings
  • - Removing the tank fairings
  • - Refitting the front half-fairing
  • - Removing the front half-fairing
  • SEAT - TAIL GUARD AND SIDE BODY PANELS
  • - Refitting the seat
  • - Refitting side body panel and tail guard
  • - Removing the side body panels and the tail guard
  • - Removing the seat
  • FRONT MUDGUARD - BELLY PAN
  • - Refitting the belly pan
  • - Removing the belly pan
  • - Refitting the front mudguard
  • - Removing the front mudguard
  • REAR MUDGUARD - SPLASH GUARD
  • - Refitting the splash guard
  • - Removing the splash guard
  • - Refitting the rear mudguard
  • - Removing the rear mudguard
  • MTS(E4).06 - ELECTRIC SYSTEM AND ENGINE MANAGEMENT
  • WIRING DIAGRAM
  • - Branch 10
  • - Branch 9
  • - Branch 8
  • - Branch 7
  • - Branch 6
  • - Branch 5
  • - Branch 4
  • - Branch 3
  • - Branch 2
  • - Branch 1
  • - Routing of wiring on frame
  • - Key-wiring diagram
  • - Technological Dictionary
  • - Acronyms and abbreviations used in the manual
  • CHARGE SYSTEM - BATTERY
  • - Rectifier-regulator
  • - Alternator / Generator
  • - Refitting the battery
  • - Removing the battery
  • - Topping up the electrolyte
  • - Recharging the battery
  • - Checking the battery charging system
  • ELECTRIC STARTER
  • - Solenoid starter
  • - Starter motor
  • - Electric starting system
  • LIGHTING
  • - Replacing the tail light bulbs
  • - Tail light
  • - Aligning the headlight
  • - Replacing the headlight bulbs
  • - Headlight
  • HANDLEBAR CONTROLS: CONTROLS
  • - Right-hand switch
  • - Left-hand switch
  • SAFETY AND PROTECTION SENSORS: CONTROLS
  • - Horn
  • - Checking the fuses
  • - Side stand switch
  • - Air temperature sensor
  • - Engine temperature sensor
  • - Clutch switch
  • - Oil pressure sensor
  • - Gear/neutral sensor
  • - Rear stop switch
  • - Front stop switch
  • ELECTRICAL COMPONENTS: CHECKS
  • - Exhaust valve motor
  • - Solenoid valves
  • - Coils
  • ELECTRONIC COMPONENTS: CHECKS
  • - Bluetooth
  • - Inertial Measurement Unit (IMU)
  • - Knock Sensor
  • - Accelerator Position System (APS)
  • - Lambda sensors
  • - Local Interconnect Network (LIN)
  • - VIN line
  • - Anti-lock Braking System (ABS)
  • - CAN line
  • - Ducati Wheelie Control (DWC)
  • - Ducati Traction Control (DTC)
  • - Rpm sensor (pick-up)
  • - Throttle Position System (TPS)
  • - Electronic Throttle Valve (ETV)
  • - Black Box System (BBS)
  • - Map sensor
  • - Engine control unit (ECU)
  • INSTRUMENTATION: DASHBOARD
  • - Restoring motorcycle operation via the PIN CODE
  • - Key duplication
  • - Replacing the battery in the active key
  • - Keys
  • - Immobilizer system
  • - Light control
  • - Bluetooth device setting
  • - Setting the units of measurement
  • - Backlighting setting
  • - Clock setting
  • - Date setting
  • - Changing the PIN CODE
  • - Pin Code
  • - Customising the Riding Mode: Reset-default settings (ALL DEFAULT)
  • - Customising the Riding Mode: Reset-default settings (DEFAULT)
  • - Customising the Riding Mode: ABS setting
  • - Customising the Riding Mode: DWC level setting
  • - Customising the Riding Mode: DTC level setting
  • - Customising the Riding Mode: Engine setting
  • - Customising the Riding Mode: Parameter storage
  • - Customising the Riding Mode
  • - Setting MENU
  • - Fog lights
  • - Side stand warning
  • - Error warnings
  • - Warnings/Alarms
  • - OIL SERVICE or SERVICE DATE or DESMO SERVICE indication
  • - OIL SERVICE or SERVICE DATE or DESMO SERVICE countdown indication
  • - OIL SERVICE zero warning
  • - Service indication (SERVICE)
  • - Cruise Control
  • - Infotainment
  • - Auxiliary functions
  • - Ambient air temperature
  • - Average speed
  • - Instantaneous fuel consumption
  • - Average fuel consumption
  • - Clock
  • - Trip time (TRIP TIME)
  • - Residual range (RANGE)
  • - Trip meter 2 (TRIP 2)
  • - Trip meter 1 (TRIP 1)
  • - Odometer (TOT)
  • - Menu Functions
  • - Engine Coolant temperature
  • - Fuel level
  • - Gear
  • - DWC
  • - ABS
  • - DTC
  • - Riding Mode
  • - Motorcycle speed
  • - Engine rpm indication (RPM)
  • - Main functions
  • - Parameter setting/displaying
  • - Function buttons
  • - Instrument panel
  • MTS(E4).07 - CHASSIS
  • FRONT WHEEL
  • - Removing the front wheel
  • - Overhauling the front wheel
  • - Refitting the front wheel
  • REAR WHEEL
  • - Refitting the rear wheel
  • - Overhauling the rear wheel
  • - Removing the rear wheel
  • FRONT BRAKE CONTROL
  • - Refitting the front brake system
  • - Refitting the brake discs
  • - Overhauling the front brake components
  • - Removing the brake discs
  • - Removing the front brake system
  • - Maintenance operations
  • - Refitting the front brake master cylinder
  • - Removing the front brake master cylinder
  • REAR BRAKE
  • - Refitting the rear brake calliper
  • - Refitting the rear brake disc
  • - Removing the rear brake disc
  • - Removing the rear brake calliper
  • - Refitting the rear brake control
  • - Disassembling the rear brake control
  • - Removing the rear brake control
  • ABS SYSTEM INFORMATION
  • - ABS system deactivation
  • - ABS system operation information
  • - Operating principle
  • ABS SYSTEM COMPONENTS
  • - Routing wiring harnesses/hoses
  • - Refitting the ABS control unit
  • - Removing the ABS control unit
  • - Changing the rear phonic wheel sensor
  • - Changing the front phonic wheel sensor
  • ABS COMPONENT MAINTENANCE
  • - Bleeding of the ABS hydraulic system
  • - Adjusting the AIR-GAP of phonic wheel sensor
  • HANDLEBAR UNIT: HAND GUARD - REAR.VIEW MIRRORS - THROTTLE CONTROL
  • - Refitting the handlebar
  • - Removing the handlebar
  • - Reassembling the hand guards
  • - Removing the hand guards
  • - Refitting the rear-view mirrors
  • - Removing the rear-view mirrors
  • HANDLEBAR ASSEMBLY: THROTTLE TWISTGRIP
  • - Refitting the throttle control
  • - Removing the throttle control
  • HANDLEBAR ASSEMBLY: HYDRAULIC CLUTCH CONTROL
  • - Refitting the clutch slave cylinder
  • - Removing the clutch slave cylinder
  • - Refitting the clutch master cylinder assembly
  • - Removing the clutch master cylinder assembly
  • HANDLEBAR ASSEMBLY: HANDS FREE
  • - Refitting the Hands Free
  • - Removing Hands Free
  • GEAR SELECTOR CONTROL
  • - Refitting the gear change control
  • - Disassembling the gear change control
  • - Removing the gear change control
  • FORK - STEERING HEAD: FRONT FORK
  • - Refitting the front fork
  • - Overhauling the front fork
  • - Removing the front fork
  • FORK - STEERING HEAD: STEERING ASSEMBLY
  • - Refitting the steering tube components
  • - Removing the steering tube components
  • - Steering angle adjustment
  • - Adjusting the steering head bearing clearance
  • REAR SHOCK ABSORBER ASSEMBLY
  • - Refitting the rear suspension
  • - Overhauling the rear shock absorber
  • - Removing the rear shock absorber
  • - Rear suspension system
  • SWINGING ARM
  • - Refitting the rear swinging arm
  • - Overhauling the rear swinging arm
  • - Inspecting the swinging arm shaft
  • - Removing the swinging arm
  • - Refitting the rear wheel eccentric hub and rear wheel shaft
  • - Removing the rear wheel eccentric hub and the rear wheel shaft
  • FINAL DRIVE
  • - Lubricating the chain
  • - Washing the chain
  • - Refitting the rear sprocket
  • - Replacing the rear sprocket
  • - Refitting the front sprocket
  • - Removing the front sprocket
  • - Inspection of the final drive
  • FOOTREST SUPPORT
  • - Refitting the footpegs
  • - Removing the footpegs
  • STANDS
  • - Refitting the centre stand
  • - Removing the centre stand
  • - Refitting the side stand
  • - Removing the side stand
  • INSPECTING THE FRAME
  • - Refitting the light assembly
  • - Refitting the side plates
  • - Refitting the structural parts and frame
  • - Removing the side panels
  • - Removing the light assembly
  • - Removing structural components and frame
  • TAIL LIGHT - NUMBER PLATE HOLDER
  • - Refitting the number plate holder
  • - Removing the number plate holder
  • ELECTRICAL COMPONENTS COMPARTMENT
  • - Refitting the electric components compartment
  • - Removing the electric components compartment
  • MTS(E4).08 - FUEL/EXHAUST SYSTEM
  • FUEL TANK
  • - Refitting the fuel tank
  • - Refitting the fuel tank flange
  • - Removing the fuel tank flange
  • - Refitting the tank filler plug
  • - Removing the tank filler plug
  • - Removing the fuel tank
  • AIRBOX ¡V THROTTLE BODY
  • - Refitting the airbox and throttle body
  • - Removing the airbox and throttle body
  • AIR INTAKE
  • - Refitting the secondary air system
  • - Removing the secondary air system
  • - Refitting the air filters
  • - Removing the air filters
  • EXHAUST SYSTEM
  • - Refitting the exhaust system
  • - Removing the exhaust system
  • - Refitting the silencer
  • - Removing the silencer
  • CANISTER FILTER
  • - Refitting the Canister filter
  • - Removing the canister filter
  • - Canister filter system
  • MTS(E4).09 - ENGINE
  • REMOVING - REFITTING THE COMPLETE ENGINE
  • - Refitting the engine
  • - Removing the engine
  • LUBRICATION SYSTEM: OIL PUMP
  • - Refitting the oil pump
  • - Reassembling the oil pump
  • - Disassembling the oil pump gear
  • - Removing the oil pump
  • LUBRICATION SYSTEM: OIL COOLER
  • - Refitting the lubrication system
  • - Inspecting the oil cooler
  • - Removing the lubrication system
  • LUBRICATION SYSTEM: OIL BREATHER RESERVOIR
  • - Refitting the oil breather reservoir
  • - Removing the oil breather reservoir
  • COOLING SYSTEM: WATER TANK
  • - Refitting the water tank
  • - Removing the water tank
  • COOLING SYSTEM: WATER RADIATOR
  • - Refitting the cooling system hoses and unions
  • - Removing the cooling system hoses and unions
  • - Fitting the radiator
  • - Replacing the electric fan
  • - Removing the radiator
  • COOLING SYSTEM: WATER PUMP
  • - Refitting the water pump
  • - Removing the water pump
  • CYLINDER HEAD ASSEMBLY: CHECKS AND ADJUSTMENTS
  • - Checking the engine timing
  • - Checking valve lift
  • - Checking and adjusting the valve clearance
  • CYLINDER HEAD ASSEMBLY: TIMING SYSTEM
  • - Refitting the timing outer covers
  • - Refitting the timing belts
  • - Refitting the cylinder heads pulleys/idler pulleys
  • - Refitting the tensioner pins
  • - Refitting the timing layshaft pulley
  • - Removing the timing layshaft pulleys
  • - Removing the tensioner pins
  • - Removing the cylinder head pulley/fixed tensioner
  • - Removing the mobile tensioner/timing belt
  • - Removing the timing belt covers
  • CYLINDER HEAD ASSEMBLY: CAMSHAFTS
  • - Refitting the camshafts
  • - Check of the camshafts and supports
  • - Removing the camshafts
  • CYLINDER HEAD ASSEMBLY: VALVES - ROCKER ARMS
  • - Refitting the cylinder heads
  • - Overhauling the cylinder head components
  • - Refitting the valve rocker arms
  • - Removing the valve rocker arms
  • - Refitting the valves
  • - Removing the valves
  • - Removing the cylinder heads
  • CYLINDER/PISTON ASSEMBLY
  • - Refitting the cylinder/piston assembly
  • - Overhauling the cylinder/piston components
  • - Removing the cylinder/piston assembly
  • CLUTCH ASSEMBLY: CLUTCH
  • - Refitting the clutch
  • - Checking and overhauling the components
  • - Removing the clutch
  • - Description of the clutch assembly
  • CLUTCH ASSEMBLY: CLUTCH COVER
  • - Refitting the clutch cover
  • - Refitting the clutch cover
  • - Disassembling the clutch cover
  • - Removing the clutch cover
  • CLUTCH ASSEMBLY: PRIMARY DRIVE GEAR
  • - Refitting the primary drive gears and checking backlash
  • - Removing the primary drive gears
  • GEARBOX ASSEMBLY: LINKAGES
  • - Refitting the gearchange mechanism
  • - Refitting the gear interlock plunger and ratchet
  • - Disassembling gear interlock plunger and ratchet
  • - Removing the gearchange mechanism
  • GEARBOX ASSEMBLY: GEARBOX SHAFTS
  • - Reassembling the gearbox assembly
  • - Reassembling the gearbox shafts
  • - Inspecting the fork selector drum
  • - Inspecting the gear selector forks
  • - Overhauling the gearbox
  • - Disassembling the gearbox shafts
  • - Removing the gearbox assembly
  • FLYWHEEL - GENERATOR
  • - Refitting the flywheel/generator assembly
  • - Overhauling the flywheel/generator assembly
  • - Removing the flywheel/generator assembly
  • - Refitting the generator cover
  • - Reassembling the generator cover
  • - Disassembling the generator cover
  • - Removing the generator cover
  • CRANKCASE: OUTER COMPONENTS
  • - Refitting the starter motor
  • - Removing the starter motor
  • - Removing the starter motor idler gear
  • - Refitting the timing gears
  • - Removing the timing gears
  • - Refitting the external components
  • - Removing outer components
  • CRANKCASE: CASINGS
  • - Closing the crankcase
  • - Shimming the shafts
  • - Reassembling the crankcase halves
  • - Main bearings
  • - Overhauling the crankcase halves
  • - Separating the crankcase halves
  • CRANKCASE: CONNECTING ROD ASSEMBLY
  • - Refitting the connecting rod assembly
  • - Reassembling the connecting rod assembly
  • - Overhauling the connecting rod assembly
  • - Disassembling the connecting rod assembly
  • - Removing the connecting rod assembly