2018–2024 Index
- Lexus ES 300h, covering 2018–2024.
- Electrical wiring diagrams for the A25A-FXS hybrid powertrain.
- Electrical circuit documentation covering hybrid control, engine management, braking, steering, safety systems, lighting, climate control, body electronics and multimedia systems.
- Overall electrical wiring diagrams, electrical component locations, ground points, wiring harness layouts, relay locations and junction block circuits.
- Documentation for Left-Hand Drive (LHD) and Right-Hand Drive (RHD) configurations.
Hybrid Powertrain & Engine Management
- A25A-FXS engine control electrical wiring diagrams.
- Hybrid system electrical control circuits.
- Hybrid cruise control system.
- Ignition system wiring.
- Engine cooling fan circuits.
- Shift lock system.
- Engine management and hybrid control connections.
- Fuel lid opener electrical circuit.
Hybrid Vehicle Safety & Notification Systems
- Vehicle Proximity Notification System.
- Hybrid-related electrical control systems.
- Electronic control and monitoring circuits associated with the A25A-FXS powertrain.
Advanced Driver Assistance Systems (ADAS)
- Dynamic Radar Cruise Control (DRCC).
- Lane Control System.
- Lane Departure Alert (LDA).
- Pre-Collision System (PCS).
- Driver assistance electrical control circuits and related system connections.
Braking, Stability & Traction Control Systems
- Anti-lock Brake System (ABS).
- Electronic Brake-force Distribution (EBD).
- Brake Assist system.
- Vehicle Stability Control (VSC).
- Traction Control (TRC).
- Hill-Start Assist Control.
- Electric Parking Brake (EPB).
- Hybrid-specific braking and stability control electrical diagrams.
Electric Power Steering & Suspension
- Electric Power Steering (EPS) for A25A-FXS configurations.
- Adaptive Variable Suspension (AVS).
- Electric steering control circuits.
- Power tilt and telescopic steering column.
- Heated steering wheel system.
Tyre Pressure Monitoring System
- Tyre Pressure Warning System.
- Integrated electrical key receiver configuration.
- Stand-alone tyre pressure monitoring configuration.
- Tyre pressure monitoring electrical circuit information.
Parking Assistance & Camera Systems
- Blind Spot Monitor System (BSM).
- Panoramic View Monitor System.
- Parking Assist Monitor System.
- Parking Support Alert System.
- Parking Support Brake System.
- Rear and surrounding vehicle monitoring electrical circuits.
Audio, Navigation & Multimedia Systems
- Lexus audio system with 12.3-inch display.
- Lexus navigation system with 12.3-inch display.
- Lexus audio system with 8-inch display.
- Lexus navigation system with 8-inch display.
- Active Noise Control system for A25A-FXS configurations.
- Multimedia electrical connections and communication circuits.
Telematics & Communication Systems
- Telematics systems with 8-inch and 12.3-inch displays.
- ERA-GLONASS and eCall configurations.
- G-BOOK telematics configurations.
- Multiplex Communication System (CAN).
- Multiplex Communication System (AVC-LAN).
- Vehicle electronic communication networks and related wiring diagrams.
Electrical Power Distribution & Ground Connections
- Power source circuits for A25A-FXS configurations.
- Electrical power distribution and supply connections.
- Diagnostic Link Connector 3 (DLC3).
- Ground point diagrams for LHD and RHD vehicles.
- Electrical junction blocks, relay blocks and fusible link circuits.
- Electrical power outlet circuits.
Heating, Ventilation & Air Conditioning (HVAC)
- Air conditioning system electrical diagrams for A25A-FXS.
- Climate control system circuits.
- Front climate-controlled seat circuits.
- Front and rear seat heater systems.
- Heated steering wheel.
- Rear window defogger.
- Heated windshield defroster and front window deicer.
- Heated washer nozzles.
Instrument Cluster & Vehicle Information Systems
- Combination meter electrical wiring for A25A-FXS.
- Instrument panel illumination.
- Clock and vehicle information displays.
- Warning and indication circuits.
- Seat belt warning system.
- Vehicle monitoring and electrical information systems.
Entry, Starting & Vehicle Security
- Smart Entry & Start System.
- Immobiliser System.
- Steering Lock system.
- Wireless Door Lock Control.
- Power door locking circuits.
- Double Locking system.
- Theft Deterrent system.
- Electrical key-related control circuits.
- LHD and RHD system configurations.
Supplemental Restraint & Pedestrian Protection Systems
- Supplemental Restraint System (SRS).
- Pedestrian Protection System.
- Seat belt warning circuits.
- Electric Tension Reducer systems.
- Safety-related electrical control wiring for LHD and RHD configurations.
Power Seats & Interior Comfort Systems
- Electrically adjustable driver and passenger seats.
- Seat position memory systems.
- Power seats with and without memory functions.
- Rear power seat circuits.
- Front climate-controlled seats and seat heaters.
- Rear seat heating.
- Rear sunshade.
- Interior illumination and courtesy lighting.
- Automatic glare-resistant electrochromic rear-view mirror.
- Garage door opener system.
Exterior Lighting & Headlamp Control
- Headlight electrical circuits.
- Adaptive High Beam System.
- Automatic High Beam System.
- Cornering lights.
- Daytime Running Lights (DRL).
- Headlight beam levelling control.
- Automatic light control and automatic light-off functions.
- Headlight cleaner system.
- Rear fog lights.
- Reversing lights, brake lights and taillights.
- Turn signals and hazard warning lights.
- Horn circuit.
Windows, Mirrors, Roof & Body Electronics
- Power window circuits for LHD and RHD configurations.
- Electric exterior mirror adjustment.
- Heated exterior mirrors.
- Reverse shift-linked mirror systems.
- Panoramic moonroof and roof sunshade.
- Sliding roof electrical circuit.
- Power trunk lid.
- Luggage compartment door opener.
- Fuel lid opener.
- Automatic grille shutter system for A25A-FXS configurations.
- Windshield wiper and washer system.
Overall Electrical Wiring Diagrams
- Dedicated overall electrical wiring diagrams for vehicle electrical systems.
- Hybrid system and A25A-FXS engine control circuits.
- Cooling fan and ignition system.
- Advanced driver assistance systems.
- ABS, traction control, stability control and electric parking brake.
- Electric power steering and adaptive suspension.
- Audio, navigation, multimedia and telematics.
- CAN and AVC-LAN multiplex communication.
- Climate control, instrumentation and vehicle security.
- Lighting, power windows, seats, mirrors and body electrical systems.
- LHD and RHD electrical configurations.
Electrical Components Locator
- Electrical component location diagrams for A25A-FXS hybrid configurations.
- Body electrical component locations.
- Engine compartment electrical component locations.
- Instrument panel and dashboard electrical component locations.
- Front and rear seat electrical component locations.
- Electrical wiring harness positioning and connections.
- Antenna locations.
- Ground point identification and positioning.
- Separate location references for LHD and RHD vehicles.
Ground Points & Wiring Harness Locations
- Body ground point locations for A25A-FXS configurations.
- Engine compartment ground point locations.
- Instrument panel ground connections.
- Body wiring harness layouts.
- Engine compartment wiring layouts.
- Instrument panel wiring diagrams.
- Front and rear seat wiring layouts.
- Model-specific wiring references for LHD and RHD vehicles.
Relay, Fuse & Junction Block Locations
- Relay locations in the vehicle body.
- Instrument panel relay locations.
- Engine compartment relay locations.
- Front and rear seat relay references.
- Engine Room Relay Block and Junction Block internal circuit diagrams.
- Instrument Panel Junction Block internal circuits.
- Relay Blocks No. 3, No. 4 and No. 5.
- Fusible Link Block internal circuit diagrams.
- Electrical component locations and power distribution references.
Additional Engine Configurations Included in the Documentation
The complete electrical documentation also contains wiring diagrams for the following Lexus ES engine configurations:
- 2GR-FKS.
- 6AR-FSE.
- A25A-FKS.
- A25A-FXS (Hybrid).
The Lexus ES 300h-specific engine and hybrid electrical sections correspond to the A25A-FXS configuration.
Why Guesswork Fails on the XZ10 Electrical Architecture
Chasing an intermittent communication loss across a 2018–2024 ES 300h without factory wiring schematics usually ends up costing workshops both time and reputation. When a vehicle comes in with a cascade of dashboard warning lights—often flagging the Pre-Collision System (PCS), Adaptive Variable Suspension (AVS), and Electric Power Steering (EPS) simultaneously—the root cause is rarely a failed primary module.
In practical diagnostics, these multi-system faults frequently trace back to micro-corrosion at a shared chassis ground point or a voltage drop across a junction block internal circuit. Because the Lexus XZ10 architecture relies heavily on high-speed CAN and AVC-LAN multiplex communication networks, even a 200-millivolt drop on a reference ground can distort serial data between the engine control module and the hybrid system transaxle. Relying on aftermarket wiring overviews won't show you the internal bussing of Engine Room Relay Block Assembly No. 1 or the exact splice locations inside the instrument panel harness.
Comprehensive Schematic Coverage Across Systems
This workshop reference lays out the complete electrical anatomy of the seventh-generation ES lineup, separating Left-Hand Drive (LHD) and Right-Hand Drive (RHD) global market specifications. Rather than offering generic block diagrams, every circuit is traced from power source to ground, complete with connector numbers, pinout configurations, and wire color codes.
- Engine & Hybrid Powertrain Management: Dedicated schematics for the A25A-FXS 2.5L Hybrid System, electronic engine controls, cooling fan integration, Electronic Controlled Transmission (ECT), Stop/Start circuits, and shift lock mechanisms. Complete coverage is also provided for conventional 2GR-FKS (3.5L V6), 6AR-FSE, and A25A-FKS powertrains.
- Lexus Safety System+ & Driver Assistance: Pin-level diagrams for Dynamic Radar Cruise Control (DRCC), Lane Departure Alert / Lane Control System (LDA), Pre-Collision System (PCS), Blind Spot Monitor (BSM), and Parking Support Brake/Alert networks.
- Chassis, Braking & Steering Integration: Full electrical routing for Electric Power Steering (EPS), Adaptive Variable Suspension (AVS), Electric Parking Brake (EPB), ABS/VSC/TRC modules, and Tire Pressure Warning Systems (both standalone and electrical key receiver integrated types).
- High-End Comfort & Telematics Networks: Complete wiring layouts for 12.3-inch and 8-inch Display Audio/Navigation setups, Active Noise Control, climate-controlled memory seating, wireless charging systems, pop-up hood Pedestrian Protection sensors, and SRS airbag deployment circuits.
Shop-Floor Diagnostic Reality: Parasitic Draws & Ground Faults
Here is a scenario common to technicians working on modern hybrid luxury sedans: An ES 300h arrives with a dead 12V auxiliary battery after sitting over a weekend. Standard current-clamp testing reveals a 350mA parasitic draw that refuses to drop after the vehicle enters sleep mode. Pulling fuses blindly in the engine bay often wakes up the gateway module, resetting the timer and obscuring the real fault.
Using the Overall Electrical Wiring Diagrams and the Relay/Junction Block Internal Circuits section of this guide allows you to trace the unswitched battery feeds directly through the Fusible Link Block Assembly and Engine Room Relay Block No. 3. On these specific models, a lingering draw is often tied to the Telematics System (ERA-GLONASS / G-BOOK eCall units) failing to power down due to a missing handshake signal on the AVC-LAN network. By checking the exact voltage drop across the ground points in the instrument panel (mapped specifically by LHD/RHD configurations), technicians can isolate poor grounding studs without ripping out the entire dashboard trim.
|
Specification
|
Technical Detail
|
|
Platform / Model Range
|
Lexus ES Series (XZ10 Platform / 7th Generation)
|
|
Model Years Covered
|
2018, 2019, 2020, 2021, 2022, 2023, 2024
|
|
Engine Coverage
|
2GR-FKS (3.5L V6), 6AR-FSE (2.0L), A25A-FKS (2.5L), A25A-FXS (2.5L Hybrid)
|
|
Steering Configurations
|
Left-Hand Drive (LHD) & Right-Hand Drive (RHD) Global Specs
|
|
Manual Type
|
Factory Electrical Wiring Diagrams (EWD) / Circuit Schematics
|
|
Delivery Format
|
Fully Bookmarked, Searchable PDF Document
|
|
Total Page Count
|
2,509 Pages
|
|
File Size
|
81 MB
|
Workshop Fulfillment & Secure Checkout
We format our delivery systems around active workshop requirements so you aren't waiting on physical media:
- Flexible Payment Gateway: Checkout securely using Credit Card, PayPal, Google Pay, or Apple Pay.
- Immediate Delivery: Your high-speed download link is dispatched instantly to your email and accessible directly inside your customer account dashboard.
- Access Period: Download links remain active for 10 days or up to 10 downloads to accommodate shop server backups.
- Redundancy Guarantee: If your network drops during transfer, we provide direct secondary delivery via a cloud-based Dropbox link upon request.
- Download Assistance: Need help setting up your PDF viewer? Watch our quick walkthrough guide here: https://servicemanuals.info/How-to-Download.mp4
Download the complete workshop manual PDF instantly and perform repairs with confidence.
Frequently Asked Questions
Why does the Dynamic Radar Cruise Control (DRCC) or Pre-Collision System throw intermittent faults after a front-end bumper repair?
In most cases, this occurs because the millimeter-wave radar sensor or front camera assembly suffered a disturbed ground reference or pinched harness during bumper refitting. Even a minor resistance increase in the ground wire back to the engine compartment ground points will cause CAN bus data packet loss. Consult the ADAS schematic section to verify pin-to-pin continuity and check the specific grounding point locations mapped for your engine specification.
Are both Left-Hand Drive (LHD) and Right-Hand Drive (RHD) ground points and relay blocks mapped separately?
Yes. Wire routing, junction block orientation, and chassis ground points differ significantly between LHD and RHD XZ10 models. This reference includes separated component location diagrams, body wiring layouts, and engine compartment grounding maps for both steering configurations across all four supported engine types.
How can I trace a parasitic draw draining the 12V auxiliary battery on an A25A-FXS hybrid model?
Start by identifying which primary circuit remains energized using the Power Source and Overall Electrical Wiring Diagrams sections. Instead of removing fuses—which wakes the CAN network—use a digital multimeter to perform millivolt drop tests across the fuses in the Fusible Link Block Assembly and Engine Room Relay Block No. 1. The diagrams detail the exact internal bussing so you can see which sub-circuits (such as Telematics, Smart Entry, or the Hybrid Vehicle Control ECU) are fed by each fusible leg.
Can I search this 2,509-page PDF by connector number or specific wire color code?
Yes. The PDF is fully searchable and structurally bookmarked. You can enter a specific connector code (e.g., junction block connectors or ECU pin designations), system title, or component name directly into your PDF reader's search bar to jump immediately to the corresponding schematic and physical location map.