Geely Emgrand (EC718, EC718RV, EC715, EC715RV) - Repair, Service and Maintenance Manual
Digital technical documentation with sections on VEHICLE OVERVIEW, Warnings and Notices, Description and Operation. Review the complete contents below for the systems and procedures covered.
Manual contents
- 1 VEHICLE OVERVIEW
- 1.1 Warnings and Notices
- - 1.1.1 Description and Operation
- - 1.1.1.1 Warnings and Notices
- 1.2 Vehicle Inspection
- - 1.2.1 Description and Operation
- - 1.2.1.1 Inspection Items Before Operating The Vehicle
- - 1.2.1.2 Inspection Items Before Each Time Filling Fuel
- - 1.2.1.3 Monthly Inspection Items
- - 1.2.1.4 Inspection Items At Least Twice A Year
- - 1.2.1.5 Inspection Items When Changing Engine Oil
- - 1.2.1.6 Inspection Items At Least Once A Year
- 1.3 Lifting and Jacking the Vehicle
- - 1.3.1 Description and Operation
- - 1.3.1.1 Lifting and Jacking the Vehicle
- 1.4 Maintenance
- - 1.4.1 Specifications
- - 1.4.1.1 Oil and Fluid Capacity
- - 1.4.1.2 Recommended Oil and Lubricants
- - 1.4.2 Description and Operation
- - 1.4.2.1 Oil Maintenance Schedule
- - 1.4.2.2 Normal Driving Condition Service Schedule
- - 1.4.2.3 Harsh Driving Condition Service Schedule
- - 1.4.2.4 Regular Service Instructions
- - 1.4.2.5 Tire Rotation Description
- 1.5 Service Information System
- - 1.5.1 Description and Operation
- - 1.5.1.1 Abbreviations Used In This Manual
- - 1.5.1.2 Arrows and Symbols Description
- 1.6 Health and Safety
- - 1.6.1 Description and Operation
- - 1.6.1.1 Description
- - 1.6.1.2 Acid and Alkali
- - 1.6.1.3 Airbag
- - 1.6.1.4 Air-Conditioning Refrigerant
- - 1.6.1.5 Adhesives and Sealants
- - 1.6.1.6 Engine Coolant
- - 1.6.1.7 Asbestos
- - 1.6.1.8 Battery Acid Fluid
- - 1.6.1.9 Brake Fluid
- - 1.6.1.10 Chemical Materials
- - 1.6.1.11 Dust
- - 1.6.1.12 Electrical Shock
- - 1.6.1.13 Exhaust
- - 1.6.1.14 Fiber Isolation
- - 1.6.1.15 Fire
- - 1.6.1.16 First Aid
- - 1.6.1.17 Foam - Polyurethane
- - 1.6.1.18 Fuel
- - 1.6.1.19 Gas Cylinder
- - 1.6.1.20 General Workshop Tools and Equipment
- - 1.6.1.21 Lubricants and Grease
- - 1.6.1.22 Noise
- 1.7 Standards and Metrics
- - 1.7.1 Description and Operation
- - 1.7.1.1 Equivalent - Decimal and Metric
- - 1.7.1.2 US English/Metric Units Conversion
- 1.8 Vehicle Specifications
- - 1.8.1 Specifications
- - 1.8.1.1 Body Size
- - 1.8.1.2 Fastener Specifications
- 1.9 Vehicle Identification Number
- - 1.9.1 Description and Operation
- - 1.9.1.1 Vehicle Identification
- - 1.9.1.2 Vehicle Identification Number (VIN) Description
- - 1.9.1.3 Compliance Label
- - 1.9.1.4 Tire Placard
- - 1.9.1.5 Engine Serial Number and its Location
- - 1.9.1.6 Manual Transmission Serial Number and its Location
- 1.10 Noise, Vibration and Abnormal Sound
- - 1.10.1 Description and Operation
- - 1.10.1.1 Diagnostic Information and Procedures
- - 1.10.1.2 Repair
- 1.11 Water Leaks
- - 1.11.1 Description and Operation
- - 1.11.1.1 Diagnostic Information and Procedures
- - 1.11.1.2 Repair
- 1.12 Special Tools
- - 1.12.1 Special Tools and Equipment
- - 1.12.1.1 Power Train Special Tools
- - 1.12.1.2 Chassis and Body Special Tools
- PART TWO POWER SYSTEM
- 2 Engine
- - 2.1 Warnings and Notices
- - 2.1.1 Warnings and Notices
- - 2.2 Control System JL4G18-D
- - 2.2.1 Specifications
- - 2.2.1.1 Fastener Tightening Specifications
- - 2.2.1.2 Temperature Sensor Temperature and Resistance Correlation
- - 2.2.1.3 Altitude and Atmospheric Pressure Correlation
- - 2.2.1.4 Intake Air Pressure Sensor Voltage and Pressure Diagram
- - 2.2.2 Description and Operation
- - 2.2.2.1 Overview
- - 2.2.2.2 Input Components
- - 2.2.2.3 Output Components
- - 2.2.3 System Working Principle
- - 2.2.3.1 System Working Principle
- - 2.2.3.2 Fuel Injection Quantity Adjustment
- - 2.2.3.3 Fault Self-Diagnostic and Protection Function
- - 2.2.4 Component Locator
- - 2.2.4.1 Fuel Injector, Idle Speed Control Valve and VVT Solenoid Valve
- - 2.2.4.2 Throttle Position Sensor, Engine Coolant Temperature Sensor, Canister Solenoid Valve and Intake Air Pressure and Temperature Sensor
- - 2.2.5 Disassemble View
- - 2.2.5.1 Throttle Body Assembly
- - 2.2.6 Schematic
- - 2.2.6.1 Schematic
- - 2.2.7 Diagnostic Information and Procedures
- - 2.2.7.1 Diagnostic Description
- - 2.2.7.2 Control System Check
- - 2.2.7.3 Intermittent Fault Check
- - 2.2.7.4 Fault Symptom Table
- - 2.2.7.5 ECM Connector Terminal Table
- - 2.2.7.6 DTC Code Type Definition
- - 2.2.7.7 DTC Code (DTC) list
- - 2.2.7.8 DTC Fail-Safe Table
- - 2.2.7.9 Data Stream List
- - 2.2.7.10 Action Test Table
- - 2.2.7.11 DTC Code Index
- - 2.2.7.12 DTC P0010 P2088 P2089
- - 2.2.7.13 DTC P000A P0012
- - 2.2.7.14 DTC P0016
- - 2.2.7.15 DTC P0030 P0031 P0032 P0053
- - 2.2.7.16 DTC P0036 P0037 P0038 P0054
- - 2.2.7.17 DTC P0105 P0106 P0107 P0108
- - 2.2.7.18 DTC P0112 P0113
- - 2.2.7.19 DTC P0117 P0118
- - 2.2.7.20 DTC P0122 P0123
- - 2.2.7.21 DTC P0130 P0131 P0132 P0133 P0134 P2195 P2196
- - 2.2.7.22 DTC P0136 P0137 P0138 P0140 P2270 P2271
- - 2.2.7.23 DTC P0170 P0171 P0172 P2177 P2178 P2187 P2188
- - 2.2.7.24 DTC P0201 P0261 P0262
- - 2.2.7.25 DTC P0202 P0264 P0265
- - 2.2.7.26 DTC P0203 P0267 P0268
- - 2.2.7.27 DTC P0204 P0270 P0271
- - 2.2.7.28 DTC P0300-P0304
- - 2.2.7.29 DTC P0321 P0322
- - 2.2.7.30 DTC P0327 P0328
- - 2.2.7.31 DTC P0340-P0343
- - 2.2.7.32 DTC P0420
- - 2.2.7.33 DTC P0444 P0458 P0459
- - 2.2.7.34 DTC P0480 P0481 P0691 P0692 P0693 P0694
- - 2.2.7.35 DTC P0501
- - 2.2.7.36 DTC P0506-P0509 P0511
- - 2.2.7.37 DTC P0560 P0562 P0563
- - 2.2.7.38 DTC P0602
- - 2.2.7.39 DTC P0627 P0628 P0629
- - 2.2.7.40 DTC P0645-P0647
- - 2.2.7.41 DTC P0650
- - 2.2.7.42 DTC P1610-P1614
- - 2.2.7.43 DTC P1523 U0001 U0121 U0140 U0151
- - 2.2.7.44 Engine Fault Lamp (MIL)/Check Vehicle Lamp Malfunction
- - 2.2.7.45 Crankshaft rotates, but the engine can not start.
- - 2.2.7.46 Idle Speed Reading Procedure
- - 2.2.8 Removal and Installation
- - 2.2.8.1 Idle Air Control Valve Replacement
- - 2.2.8.2 Fuel Injector Replacement
- - 2.2.8.3 Throttle Position Sensor Replacement
- - 2.2.8.4 VVT Solenoid Valve Replacement and Filter Cleaning
- - 2.2.8.5 VVT Solenoid Valve Cleaning
- - 2.2.8.6 Engine Coolant Temperature Sensor Replacement
- - 2.2.8.7 Intake Air Pressure and Temperature Sensor Replacement
- - 2.2.8.8 Engine Control Module Replacement
- - 2.3 Fuel System JL4G18-D
- - 2.3.1 Specifications
- - 2.3.1.1 Fastener Tightening Specifications
- - 2.3.2 Description and Operation
- - 2.3.2.1 Description and Operation
- - 2.3.3 System Working Principle
- - 2.3.3.1 System Working Principle
- - 2.3.4 Component Locator
- - 2.3.4.1 Fuel Filler
- - 2.3.4.2 Fuel Supply System
- - 2.3.4.3 Fuel Tank Assembly
- - 2.3.4.4 Fuel Pump Assembly
- - 2.3.4.5 Fuel Injectors
- - 2.3.5 Disassemble View
- - 2.3.5.1 Disassemble View
- - 2.3.6 Schematic
- - 2.3.6.1 Schematic
- - 2.3.7 Diagnostic Information and Procedures
- - 2.3.7.1 Diagnostic Descriptions
- - 2.3.7.2 Visual Inspection
- - 2.3.7.3 Fuel Pump Inoperative
- - 2.3.7.4 All Fuel Injectors Inoperative
- - 2.3.7.5 Fuel Gage Inaccurate
- - 2.3.7.6 Surge diagnostic
- - 2.3.7.7 Fuel Pressure Testing Procedure
- - 2.3.8 Removal and Installation
- - 2.3.8.1 Fuel Pressure Release Procedure
- - 2.3.8.2 Fuel Filter Replacement
- - 2.3.8.3 Fuel Pump Assembly Replacement
- - 2.3.8.4 Fuel Level Sensor Replacement
- - 2.4 Auxiliary Emission Control JL4G18-D
- - 2.4.1 Specifications
- - 2.4.1.1 Fastener Tightening Specifications
- - 2.4.2 Description and Operation
- - 2.4.2.1 Heated Oxygen Sensor (HO2S)
- - 2.4.2.2 Evaporative Emission Control System
- - 2.4.2.3 Purged Crankcase Ventilation (PCV) System
- - 2.4.3 System Working Principle
- - 2.4.3.1 Heated Type Oxygen Sensor Working Principle
- - 2.4.3.2 Canister Solenoid Valve Working Principle
- - 2.4.4 Component Locator
- - 2.4.4.1 Canister Location
- - 2.4.4.2 Canister Solenoid Valve Location
- - 2.4.5 Schematic
- - 2.4.5.1 Schematic
- - 2.4.6 Diagnostic Information and Procedures
- - 2.4.6.1 Diagnostic Description
- - 2.4.6.2 Visual Inspection
- - 2.4.6.3 Canister Solenoid Valve Inoperative
- - 2.4.6.4 Crankcase Ventilation (PCV) System Check / Diagnostic
- - 2.4.7 Removal and Installation
- - 2.4.7.1 Post-Catalytic Oxygen Sensor Replacement
- - 2.4.7.2 Pre-Catalytic Oxygen Sensor Replacement
- - 2.4.7.3 Canister Solenoid Valve Replacement
- - 2.5 Engine Anti-theft System JL4G18-D
- - 2.5.1 Specifications
- - 2.5.1.1 Fastener Tightening Specifications
- - 2.5.2 Description and Operation
- - 2.5.2.1 Description and Operation
- - 2.5.3 System Working Principle
- - 2.5.3.1 System Working Principle
- - 2.5.4 Component Locator
- - 2.5.4.1 Component Locator
- - 2.5.5 Disassemble View
- - 2.5.5.1 Disassemble View
- - 2.5.6 Schematic
- - 2.5.6.1 Schematic
- - 2.5.7 Diagnostic Information and Procedures
- - 2.5.7.1 Diagnosis Description
- - 2.5.7.2 Visual Inspection
- - 2.5.7.3 Anti-theft Engine Control Module Connector List
- - 2.5.7.4 DTC code (DTC) list
- - 2.5.7.5 Data Flow Table
- - 2.5.7.6 Fault Symptom Table
- - 2.5.7.7 Replaced Key Programming
- - 2.5.7.8 Ignition Key Erase
- - 2.5.7.9 Replaced Security Module Programming
- - 2.5.7.10 Replaced ECM Programming
- - 2.5.7.11 Replaced Anti-theft Module and ECM Programming
- - 2.5.7.12 Engine Anti-theft Warning Lamp Flashing, Vehicle Can Not Start
- - 2.5.8 Removal and Installation
- - 2.5.8.1 EAS Coil Replacement
- - 2.5.8.2 Anti-theft System Control Module Replacement
- - 2.6 Engine Mechanical System JL4G18-D
- - 2.6.1 Specifications
- - 2.6.1.1 Fastener Tightening Specifications
- - 2.6.1.2 Mechanical System Specification
- - 2.6.1.3 Intake and Exhaust Valves Lifter Specifications Table
- - 2.6.1.4 Intake and Exhaust Valves Lifter Selection Table
- - 2.6.2 Description and Operation
- - 2.6.2.1 Description and Operation
- - 2.6.3 System Working Principle
- - 2.6.3.1 System Working Principle
- - 2.6.4 Component Locator
- - 2.6.4.1 Component Locator
- - 2.6.5 Disassemble View
- - 2.6.5.1 Cylinder Head Covers
- - 2.6.5.2 Camshaft and Accessories
- - 2.6.5.3 Cylinder Head
- - 2.6.5.4 Cylinder Block
- - 2.6.6 Schematic
- - 2.6.6.1 Schematic
- - 2.6.7 Diagnostic Information and Procedures
- - 2.6.7.1 Diagnosis Description
- - 2.6.7.2 Visual Inspection
- - 2.6.7.3 Comprehensive Engine Inspections
- - 2.6.7.4 Engine Noise Diagnosis
- - 2.6.7.5 Noisy when there is engine load
- - 2.6.7.6 Slight vibration when engine is warming up.
- - 2.6.7.7 Vibration at idle and when engine is warming up
- - 2.6.7.8 Misfire Accompanied By Abnormal Engine Noise
- - 2.6.7.9 Drive Belt Inspection
- - 2.6.7.10 Drive Belt Chirp Sound Diagnostic
- - 2.6.7.11 Drive Belt Scream Diagnostic
- - 2.6.7.12 Drive Belt Hum Sound Diagnostic
- - 2.6.7.13 Drive Belt Off Diagnostics
- - 2.6.7.14 Drive Belt Excessive Wear
- - 2.6.8 Removal and Installation
- - 2.6.8.1 Plastic Engine Shield Replacement
- - 2.6.8.2 Cylinder Head Cover Replacement
- - 2.6.8.3 Drive Belt Replacement
- - 2.6.8.4 Drive Belt Tensioner Replacement
- - 2.6.8.5 Throttle Body Assembly Replacement
- - 2.6.8.6 Intake Manifold Assembly Replacement
- - 2.6.8.7 Engine Mount Replacement
- - 2.6.8.8 Timing Chain Tensioner Replacement
- - 2.6.8.9 Timing Chain Cover Replacement
- - 2.6.8.10 Timing Chain Replacement
- - 2.6.8.11 Timing Chain Inspection
- - 2.6.8.12 Camshaft Replacement
- - 2.6.8.13 Engine Replacement
- - 2.6.8.14 Cylinder Head Assembly Replacement
- - 2.6.8.15 Cylinder Head Assembly Removal and Installation
- - 2.6.8.16 Piston Connecting Rod and Bearing Replacement
- - 2.6.8.17 Flywheel Replacement
- - 2.6.8.18 Crankshaft Replacement
- - 2.6.8.19 Piston Rod Disassemble, Assemble and Inspection
- - 2.6.8.20 Valve Clearance Adjustments
- - 2.6.8.21 Crankshaft Front Oil Seal Replacement
- - 2.6.8.22 Crankshaft Rear Oil Seal Replacement
- - 2.6.9 Special Tools and Equipment
- - 2.6.9.1 Special Tools List
- - 2.7 Exhaust System JL4G18-D
- - 2.7.1 Specifications
- - 2.7.1.1 Fastener Tightening Specifications
- - 2.7.2 Description and Operation
- - 2.7.2.1 Exhaust Manifold
- - 2.7.2.2 Three-Way Catalytic Converter
- - 2.7.3 System Working Principle
- - 2.7.3.1 System Working Principle
- - 2.7.4 Component Locator
- - 2.7.4.1 Exhaust
- - 2.7.4.2 Three-Way Catalytic Converter Assembly
- - 2.7.4.3 Front Muffler Assembly
- - 2.7.4.4 Rear Muffler Assembly
- - 2.7.4.5 Front Exhaust Insulation Panel
- - 2.7.4.6 Front Muffler Heat Shield
- - 2.7.5 Diagnostic Information and Procedures
- - 2.7.5.1 Diagnostic Description
- - 2.7.5.2 Visual Inspection
- - 2.7.5.3 Exhaust System Blockage
- - 2.7.5.4 Exhaust System Leakage
- - 2.7.5.5 Exhaust System Noise
- - 2.7.5.6 Exhaust System Repair Notes
- - 2.7.6 Removal and Installation
- - 2.7.6.1 Exhaust Manifold Replacement
- - 2.7.6.2 Three-way Catalytic Converter Replacement
- - 2.7.6.3 Front Muffler Replacement
- - 2.7.6.4 Rear Muffler Replacement
- - 2.8 Cooling System JL4G18-D
- - 2.8.1 Specifications
- - 2.8.1.1 Fastener Tightening Specifications
- - 2.8.1.2 Cooling System Specifications
- - 2.8.2 Description and Operation
- - 2.8.2.1 Description and Operation
- - 2.8.3 System Working Principle
- - 2.8.3.1 System Working Principle
- - 2.8.4 Component Locator
- - 2.8.4.1 Component Locator
- - 2.8.5 Disassemble View
- - 2.8.5.1 Disassemble View
- - 2.8.6 Schematic
- - 2.8.6.1 Schematic
- - 2.8.7 Diagnostic Information and Procedures
- - 2.8.7.1 Diagnosis Description
- - 2.8.7.2 Cooling Fan Circuit Diagnosis
- - 2.8.7.3 High-Speed Cooling Fan Does Not Run
- - 2.8.7.4 Low-Speed Cooling Fan Does Not Run
- - 2.8.7.5 Cooling Fan Always Runs At Low Speed
- - 2.8.7.6 Cooling Fan Always Runs At High Speed
- - 2.8.7.7 Thermostat Diagnostic
- - 2.8.7.8 Engine Overheating
- - 2.8.7.9 Engine Does Not Reach Normal Operating Temperature
- - 2.8.7.10 Excessive Engine Coolant Loss
- - 2.8.8 Removal and Installation
- - 2.8.8.1 Engine Coolant Discharge and Filling
- - 2.8.8.2 Coolant Recovery Reservoir Replacement
- - 2.8.8.3 Cooling Fan Replacement
- - 2.8.8.4 Thermostat Replacement
- - 2.8.8.5 Radiator Replacement
- - 2.8.8.6 Water Pump Replacement
- - 2.9 Lubricating System JL4G18-D
- - 2.9.1 Specifications
- - 2.9.1.1 Fastener Tightening Specifications
- - 2.9.1.2 Oil Pump Specifications
- - 2.9.2 Description and Operation
- - 2.9.2.1 Description and Operation
- - 2.9.3 System Working Principle
- - 2.9.3.1 Lubrication Schematic
- - 2.9.3.2 Engine Oil Pressure Sensor Plug Control Principle
- - 2.9.4 Component Locator
- - 2.9.4.1 Component Locator
- - 2.9.5 Disassemble View
- - 2.9.5.1 Disassemble View
- - 2.9.6 Schematic
- - 2.9.6.1 Schematic
- - 2.9.7 Diagnostic Information and Procedures
- - 2.9.7.1 Diagnosis Description
- - 2.9.7.2 Visual Inspection
- - 2.9.7.3 Abnormal Engine Oil Consumption Diagnostic
- - 2.9.7.4 Engine Oil Pressure Diagnostic and Test
- - 2.9.7.5 Engine Oil Leak Diagnostic
- - 2.9.8 Removal and Installation
- - 2.9.8.1 Oil Pump Replacement
- - 2.9.8.2 Oil Pump Cleaning and Inspection
- - 2.9.8.3 Oil Pan Replacement
- - 2.10 Ignition System JL4G18-D
- - 2.10.1 Specifications
- - 2.10.1.1 Fastener Tightening Specifications
- - 2.10.1.2 Ignition System Specification
- - 2.10.2 Description and Operation
- - 2.10.2.1 Description and Operation
- - 2.10.3 System Working Principle
- - 2.10.3.1 System Working Principle
- - 2.10.4 Component Locator
- - 2.10.4.1 Component Locator
- - 2.10.5 Disassemble View
- - 2.10.5.1 Ignition Cylinder Assembly Disassemble View
- - 2.10.6 Schematic
- - 2.10.6.1 Schematic
- - 2.10.7 Diagnostic Information and Procedures
- - 2.10.7.1 Diagnosis Description
- - 2.10.7.2 Visual Inspection
- - 2.10.7.3 Check Ignition Switch
- - 2.10.7.4 Ignition Relay IG1 No Power Output
- - 2.10.7.5 Spark Plug Does Not Arcing
- - 2.10.7.6 Spark Plug Diagnostic
- - 2.10.7.7 Common Spark Plug Malfunction
- - 2.10.8 Removal and Installation
- - 2.10.8.1 Camshaft Position Sensor Replacement
- - 2.10.8.2 Crankshaft Position Sensor Replacement
- - 2.10.8.3 Ignition Coil Replacement
- - 2.10.8.4 Spark Plug Replacement
- - 2.10.8.5 Knock Sensor Replacement
- - 2.11 Starting / Charging System JL4G18-D
- - 2.11.1 Specifications
- - 2.11.1.1 Fastener Tightening Specifications
- - 2.11.1.2 General Specifications
- - 2.11.2 Description and Operation
- - 2.11.2.1 Battery Description and Operation
- - 2.11.2.2 Starting System Description and Operation
- - 2.11.2.3 Charging System Description and Operation
- - 2.11.3 System Working Principle
- - 2.11.3.1 Starting System Working Principle
- - 2.11.3.2 Charging System Working Principle
- - 2.11.4 Component Locator
- - 2.11.4.1 Generator and Starter
- - 2.11.5 Disassemble View
- - 2.11.5.1 Starter Disassemble View
- - 2.11.5.2 Generator Disassemble View
- - 2.11.6 Schematic
- - 2.11.6.1 Schematic
- - 2.11.7 Diagnostic Information and Procedures
- - 2.11.7.1 Diagnosis Description
- - 2.11.7.2 Visual Inspection
- - 2.11.7.3 Starter Can Not Stop
- - 2.11.7.4 Engine Can Not Start
- - 2.11.7.5 Start Motor Noise Diagnostic
- - 2.11.7.6 Charging Indicator Always On
- - 2.11.7.7 Charging Indicator Always Off
- - 2.11.7.8 Generator Noise Diagnosis
- - 2.11.7.9 Battery Discharging Current Parasitic Load Test
- - 2.11.7.10 Jump Start Procedure
- - 2.11.8 Removal and Installation
- - 2.11.8.1 Battery Disconnection
- - 2.11.8.2 Battery Replacement
- - 2.11.8.3 Generator Replacement
- - 2.11.8.4 Starter Replacement
- - 2.12 Control System JL4G15-D
- - 2.12.1 Specifications
- - 2.12.1.1 Fastener Tightening Specifications
- - 2.12.1.2 Intake Air Temperature Sensor Non-Load Resistance Temperature Characteristics Table
- - 2.12.1.3 Intake Air Pressure Sensor Output Voltage and Pressure Relationship
- - 2.12.2 Description and Operation
- - 2.12.2.1 Overview
- - 2.12.2.2 Components Descriptions
- - 2.12.3 System Working Principle
- - 2.12.3.1 Electronic Throttle Body (ETC) Working Principle
- - 2.12.3.2 ECM Controlled Fuel Supply System
- - 2.12.3.3 ECM Controlled Ignition System
- - 2.12.3.4 Electronic Throttle Body Function Restrictions
- - 2.12.3.5 Idle Speed Control
- - 2.12.3.6 Knock Control
- - 2.12.3.7 Air-Conditioning Switch Off Control
- - 2.12.3.8 Canister Solenoid Valve Control
- - 2.12.3.9 Fault Self-diagnosis and Protection Function
- - 2.12.4 Component Locator
- - 2.12.4.1 Component Locator
- - 2.12.5 Disassemble View
- - 2.12.5.1 Disassemble View
- - 2.12.6 Schematic
- - 2.12.6.1 Schematic
- - 2.12.7 Diagnostic Information and Procedures
- - 2.12.7.1 Diagnosis Description
- - 2.12.7.2 Control System Check
- - 2.12.7.3 Intermittent Fault Check
- - 2.12.7.4 Symptoms Table
- - 2.12.7.5 ECM Terminal List
- - 2.12.7.6 DTC Code Type Definition
- - 2.12.7.7 DTC Code (DTC) List
- - 2.12.7.8 DTC Fail-Safe List
- - 2.12.7.9 Data Stream List
- - 2.12.7.10 Action Test Table
- - 2.12.7.11 Crankshaft Position Sensor (CKP) Learn
- - 2.12.7.12 Electronic Throttle Body (ETC) Check
- - 2.12.7.13 Acceleration Pedal Position Sensor (APP) Check
- - 2.12.7.14 DTC Code Index
- - 2.12.7.15 DTC P0011 P0012 P0016 P0026
- - 2.12.7.16 DTC P0068 P0106
- - 2.12.7.17 DTC P0076 P0077
- - 2.12.7.18 DTC P0107 P0108
- - 2.12.7.19 DTC P0112 P0113
- - 2.12.7.20 DTC P0117 P0118
- - 2.12.7.21 DTC P0122 P0123
- - 2.12.7.22 DTC P0131 P0132 P0133 P0134
- - 2.12.7.23 DTC P0135
- - 2.12.7.24 DTC P0137 P0138 P0140
- - 2.12.7.25 DTC P0141
- - 2.12.7.26 DTC P0171 P0172 P1167 P1171 P2187 P2188
- - 2.12.7.27 DTC P0222 P0223
- - 2.12.7.28 DTC P0230
- - 2.12.7.29 DTC P0261 P0262
- - 2.12.7.30 DTC P0264 P0265
- - 2.12.7.31 DTC P0267 P0268
- - 2.12.7.32 DTC P0270 P0271
- - 2.12.7.33 DTC P0300
- - 2.12.7.34 DTC P0324 P0325
- - 2.12.7.35 DTC P0335 P0336
- - 2.12.7.36 DTC P0340 P0341
- - 2.12.7.37 DTC P0351 P0352
- - 2.12.7.38 DTC P0420
- - 2.12.7.39 DTC P0458 P0459
- - 2.12.7.40 DTC P0480 P0481
- - 2.12.7.41 DTC P0502
- - 2.12.7.42 DTC P0506 P0507
- - 2.12.7.43 DTC P0562 P0563
- - 2.12.7.44 DTC P0571
- - 2.12.7.45 DTC P0601 P0602 P0604 P0606 P060A P1516 P2101
- - 2.12.7.46 DTC P0641 P0651
- - 2.12.7.47 DTC P0646 P0647
- - 2.12.7.48 DTC P0650
- - 2.12.7.49 DTC P0685
- - 2.12.7.50 DTC P2104 P2105 P2106 P2110
- - 2.12.7.51 DTC P2119
- - 2.12.7.52 DTC P2122 P2123
- - 2.12.7.53 DTC P2127 P2128
- - 2.12.7.54 DTC P2135
- - 2.12.7.55 DTC P2138
- - 2.12.7.56 DTC P2610
- - 2.12.7.57 DTC P0633 U0167 U0426
- - 2.12.7.58 Crankshaft Rotation Normal, But The Engine Can Not Start
- - 2.12.7.59 Electronic Throttle Body (ETC) Adaptive Learn Program
- - 2.12.8 Removal and Installation
- - 2.12.8.1 Acceleration Pedal Replacement
- - 2.13 Fuel System JL4G15-D
- - 2.13.1 4G15-D Fuel System Overview
- - 2.13.1 Diagnostic Information and Procedures
- - 2.13.1.1 Fuel Pump Inoperative
- - 2.13.1.2 All Fuel Injectors Inoperative
- - 2.13.2 Removal and Installation
- - 2.13.2.1 Fuel Injector Replacement
- - 2.14 Auxiliary Emission Control JL4G15-D
- - 2.14.1 4G15-D auxiliary emission control devices, an overview
- - 2.14.1 Component Locator
- - 2.14.1.1 Component Locator
- - 2.14.2 Diagnostic Information and Procedures
- - 2.14.2.1 Canister Solenoid Valve Inoperative
- - 2.15 Engine Anti-theft System JL4G15-D
- - 2.15.1 4G15-D Engine Anti-theft System Overview
- - 2.15.1 Diagnostic Information and Procedures
- - 2.15.1.1 Engine Anti-theft System Warning Lamp Flashing, The Vehicle Can Not Be Started
- - 2.16 Engine Mechanical Systems JL4G15-D
- - 2.16.1 4G15-D Engine Mechanical System Overview
- - 2.16.1 Specifications
- - 2.16.1.1 Fastener Tightening Specifications
- - 2.16.1.2 Mechanical System Specifications
- - 2.16.1.3 Intake and Exhaust Valves Lifter Specifications Table
- - 2.16.1.4 Intake and Exhaust Valves Lifter Selection Table
- - 2.16.2 System Working Principle
- - 2.16.2.1 System Working Principle
- - 2.16.3 Removal and Installation
- - 2.16.3.1 4G15-D Mechanical Parts Disassemble Instructions
- - 2.16.3.2 Electronic Throttle Body Replacement
- - 2.17 Exhaust System JL4G15-D
- - 2.17.1 4G15-D Engine Exhaust System Overview
- - 2.17.1 Specifications
- - 2.17.1.1 Fastener Tightening Specifications
- - 2.18 Engine Cooling System JL4G15-D
- AND MORE....