• -$10.00
Ducati Multistrada 1200 S Pikes Peak - Service Manual & Wiring Diagrams
search
  • Ducati Multistrada 1200 S Pikes Peak - Service Manual & Wiring Diagrams

Ducati Multistrada 1200 S Pikes Peak - Service Manual & Wiring Diagrams

$29.95
$19.95 Save $10.00
No tax
Quantity

YOUTUBE Official Channel @SoloPDFcom (+18,000 subs). Trusted by mechanics worldwide using professional workshop manuals and wiring diagrams.

Ducati Multistrada 1200 S Pikes Peak — Service Manual & Wiring Diagrams

This download provides service and repair information together with indexed wiring/circuit diagrams for Ducati Multistrada 1200 S Pikes Peak. The technical index below is retained from the original product listing; headings and listed systems do not imply additional unlisted procedures.

Indexed topics include: Engine tightening torque values; ELECTRICAL COMPONENT TRAY; WIRING DIAGRAM.

Original technical index

  • MTS.01 - GENERAL
  • SYMBOLS - ABBREVIATIONS - REFERENCES
  • Product specifications
  • HAZARDOUS PRODUCTS - WARNINGS
  • General maintenance instructions
  • General safety rules
  • MTS.02 - INFORMATION ABOUT THE MODEL
  • MODEL IDENTIFICATION DATA
  • Identification data
  • MTS.03 - TECHNICAL DATA
  • TECHNICAL SPECIFICATIONS
  • Lights/instrument panel
  • Injection system
  • Fuel system
  • Injection-ignition system
  • Charging system/generator
  • Hydraulic brakes
  • Rear suspension
  • Rear wheel
  • Front suspension
  • Front wheel
  • Cooling system
  • Gearbox
  • Cylinder/Piston
  • Crankshaft
  • Timing system/valves
  • Transmission
  • Colours
  • General
  • DIMENSIONS
  • Dimensions
  • FUEL, LUBRICANTS AND OTHER FLUIDS
  • Fuel, lubricants and other fluids
  • TIGHTENING TORQUE VALUES
  • Engine tightening torque values
  • Frame tightening torque values
  • MTS.04 - MAINTENANCE OPERATIONS
  • VEHICLE PRE-DELIVERY
  • Assembly - packaging
  • Vehicle pre-delivery
  • SCHEDULED MAINTENANCE CHART
  • Operations-be carried out by the customer
  • Operations-be carried out by the dealer
  • MAINTENANCE OPERATIONS
  • Adjusting vehicle setup
  • Adjusting the rear shock absorber
  • Adjusting the front fork
  • Adjusting the position of the gear change and rear brake pedals
  • Adjusting the clutch lever and front brake lever
  • Checking the rear brake pad wear and changing the brake pads
  • Checking the front brake pad wear and changing the brake pads
  • Adjusting the chain tension
  • Adjusting the steering head bearing play
  • Adjusting the clutch control cable
  • Filling the clutch circuit
  • Draining the clutch hydraulic circuit
  • Changing the clutch fluid
  • Changing the fluid in the rear brake system
  • Changing the fluid in the front brake system
  • Changing the coolant
  • Checking the coolant level
  • Changing and cleaning the air filters
  • Spark plugs replacement
  • Changing the timing belts
  • Checking valve clearance
  • Changing the engine oil and filter cartridge
  • Check engine oil level
  • ACCESSORIES
  • Assembling the filler plug lock
  • Removing the filler plug lock
  • Pannier bottom and low lid kit
  • Cover kit
  • Elastic elements kit
  • Side panniers kit
  • Side panniers kit
  • MTS.05 - FAIRINGS
  • PANEL - HEADLIGHT FAIRING
  • Refitting the headlight fairing
  • Removing the headlight fairing
  • Refitting the panel
  • Removing the panel
  • FAIRINGS
  • Refitting the fuel tank fairings
  • Refitting the front half-fairing
  • Removing the front half-fairing
  • Removing the front half-fairing
  • SEAT - TAIL GUARD AND FAIRINGS
  • Side Body Panel and Tail Guard Reassembly
  • Side Body Panel and Tail Guard Removal
  • Refitting the seat
  • Removing the seat
  • FRONT MUDGUARD - UNDERSUMP
  • Refitting the undersump
  • Removing the undersump
  • Front semi-mudguard kit
  • Refitting the front mudguard
  • Removing the front mudguard
  • REAR MUDGUARD - SPLASHGUARD
  • Refitting the splash guard
  • Removing the splash guard
  • Long rear mudguard kit
  • Refitting the rear mudguard
  • Removing the rear mudguard
  • MTS.06 - ELECTRIC SYSTEM AND ENGINE MANAGEMENT
  • WIRING DIAGRAM
  • Table T
  • Table S
  • Table R
  • Table P
  • Table O
  • Table N
  • Table M
  • Table L
  • Table K
  • Table J
  • Table I
  • Table H
  • Table G
  • Table F
  • Table E
  • Table D
  • Table C
  • Table B
  • Table A
  • Routing of wiring on frame
  • Key-fuse box
  • Wiring diagram colour codes
  • Key-wiring diagram
  • BATTERY CHARGING SYSTEM
  • Rectifier-regulator
  • Generator
  • Battery
  • Topping up the electrolyte
  • Recharging the battery
  • Checking the battery charging system
  • ELECTRIC STARTING
  • Solenoid starter
  • Starter motor
  • Electric starting system
  • LIGHTS
  • Headlight aim
  • MTS.07 - CHASSIS
  • FRONT WHEEL
  • Refitting the front wheel
  • Overhauling the front wheel
  • Removing the front wheel
  • REAR WHEEL
  • Refitting the rear wheel
  • Overhauling the rear wheel
  • Removing the rear wheel
  • FRONT BRAKE CONTROL
  • Refitting the front brake system
  • Refitting the brake discs
  • Overhauling the front brake components
  • Removing the brake discs
  • Removing the front brake system
  • Maintenance operations
  • Refitting the front brake master cylinder
  • Removing the front brake master cylinder
  • REAR BRAKE
  • Refitting the rear brake calliper
  • Removing the rear brake disc
  • Removing the rear brake calliper
  • Refitting the rear brake control
  • Disassembling the rear brake control
  • Removing the rear brake control
  • ABS INFORMATION
  • Disabling the ABS
  • ABS operating information
  • Operating principle
  • ABS COMPONENTS
  • Wiring/hose routing
  • Refitting the ABS control unit
  • Removing the ABS control unit
  • Changing the rear phonic wheel sensor
  • Changing the front phonic wheel sensor
  • ABS COMPONENT MAINTENANCE
  • Bleeding the ABS hydraulic system
  • Adjusting the phonic wheel sensor AIR-GAP
  • HANDLEBAR UNIT: HAND GUARD - REAR.VIEW MIRRORS - THROTTLE CONTROL
  • Refitting the handlebar
  • Removing the handlebar
  • Refitting the hand guards
  • Removing the hand guards
  • Refitting the rear-view mirrors
  • Removing the rear-view mirrors
  • ADJUSTING THE THROTTLE CABLE
  • Refitting the throttle twistgrip
  • Removing the throttle twistgrip
  • HANDLEBAR UNIT: HYDRAULIC CLUTCH CONTROL
  • Refitting the clutch transmission unit
  • Removal of the clutch transmission unit
  • Refitting the clutch master cylinder assembly
  • Removal of the clutch master cylinder assembly
  • HANDLEBAR UNIT: HANDS FREE
  • Refitting the Hands Free
  • Removing the Hands Free
  • GEARCHANGE MECHANISM
  • Refitting the gearchange mechanism
  • Disassembling the gearchange control
  • Removing the gearchange mechanism
  • FORK - STEERING HEAD: FRONT FORK
  • Refitting the front forks
  • Overhauling the front forks
  • Removal of the front forks
  • FORK - STEERING HEAD: STEERING
  • Refitting the steering tube components
  • Removing the steering head components
  • Steering angle adjustment
  • Adjusting the steering head bearing clearance
  • REAR SHOCK ABSORBER UNIT
  • Refitting the rear suspension
  • Overhauling the rear shock absorber
  • Removing the rear shock absorber
  • Rear suspension system
  • SWINGING ARM
  • Refitting the rear swinging arm
  • Overhauling the rear swinging arm
  • Inspecting the swinging arm shaft
  • Removing the swinging arm
  • Refitting the rear wheel eccentric hub and rear wheel shaft
  • Removing the rear wheel eccentric hub and the rear wheel shaft
  • FINAL DRIVE
  • Lubricating the chain
  • Washing the chain
  • Refitting the rear sprocket
  • Replacing the rear sprocket
  • Refitting the front sprocket
  • Removing the front sprocket
  • Inspecting the final drive
  • FOOTPEG BRACKETS
  • Refitting the footpegs
  • Removing the footpegs
  • STANDS
  • Refitting the side stand
  • Removing the side stand
  • FRAME INSPECTION
  • Refitting the side plates
  • Removing the side plates
  • Refitting the rear subframe
  • Removal of the rear subframe
  • Refitting the headlight assembly
  • Removing of the headlight assembly
  • Reassembling structural components and frame
  • Checking the frame
  • Disassembling structural components and frame
  • TAIL LIGHT - NUMBER PLATE HOLDER
  • Refitting the number plate holder
  • Removing the number plate holder
  • ELECTRICAL COMPONENT TRAY
  • Refitting the electrical component tray
  • Removing the electrical component tray
  • MTS.08 - FUEL SYSTEM / EXHAUST SYSTEM
  • FUEL TANK
  • Refitting the fuel tank flange
  • Removing the tank flange
  • Refitting the filler cap
  • Removing the filler cap
  • Refitting the fuel tank
  • Airbox ??V Throttle Body
  • Refitting airbox and throttle body
  • Removing the airbox and throttle body
  • AIR INTAKE
  • Refitting the secondary air system
  • Removing the secondary air system
  • Refitting the air filters
  • Removing the air filters
  • EXHAUST SYSTEM
  • Refitting the exhaust system
  • Removing the exhaust system
  • Refitting the silencer
  • Removing the silencer
  • CANISTER FILTER
  • Refitting the Canister filter
  • Removing the Canister filter
  • Canister filter system
  • MTS.09 - ENGINE
  • Removing??Vrefitting the engine assembly
  • Refitting the engine
  • Removing the engine
  • LUBRICATION SYSTEM: OIL PUMP
  • Refitting the oil pump
  • Reassembling the oil pump
  • Disassembling the oil pump
  • Removing the oil pump
  • LUBRICATION SYSTEM: OIL COOLER
  • Refitting the lubrication system
  • Oil cooler inspection
  • Removing the lubrication system
  • LUBRICATION SYSTEM: OIL BREATHER TANK
  • Refitting the oil breather tank
  • Removal of the oil breather tank
  • COOLING SYSTEM: WATER TANK
  • Refitting the water tank
  • Removing the water tank
  • COOLING SYSTEM: WATER RADIATOR
  • Refitting the cooling system hoses and unions
  • Removing the cooling system hoses and unions
  • Refitting the water radiator
  • Replacing the cooling fan
  • Removing the water radiator
  • COOLING SYSTEM: WATER PUMP
  • Refitting the water pump
  • Removing the water pump
  • CYLINDER HEAD ASSEMBLY: CHECKS AND ADJUSTMENTS
  • Checking the engine timing
  • Checking valve lift
  • Checking and adjusting the valve clearance
  • CYLINDER HEAD ASSEMBLY: TIMING SYSTEM
  • Refitting the timing outer covers
  • Refitting the timing belts
  • Refitting the cylinder heads pulleys/idler pulleys
  • Reassembling the timing pulleys
  • Refitting the idler and tensioner pulley mounting pins
  • Refitting the timing layshaft pulley
  • Removing the timing layshaft pulleys
  • Disassembling the camshaft pulleys
  • Removing the tensioner pins
  • Removing the cylinder head pulley/idler pulley
  • Removing the tensioner pulley/timing belt
  • Removing the timing belt covers
  • CYLINDER HEAD ASSEMBLY: CAMSHAFTS
  • Refitting the intake manifold and water union
  • Removing the intake manifold and water union
  • Refitting the camshafts
  • Checking the camshafts and supports
  • Removing the camshafts
  • CYLINDER HEAD ASSEMBLIES: VALVES - ROCKER ARMS
  • Refitting the cylinder head assemblies
  • Reassembling the cylinder head
  • Overhauling the cylinder head components
  • Removing the valve rocker arms
  • Removing the valves
  • Removing the cylinder heads
  • CYLINDER/PISTON ASSEMBLY
  • Refitting the cylinder/piston assembly
  • Overhauling the cylinder/piston components
  • Removing the cylinder/piston assembly
  • CLUTCH ASSEMBLY: CLUTCH
  • Reassembling the clutch
  • Checking and overhauling the components
  • Removing the clutch
  • Description of the clutch assembly
  • CLUTCH ASSEMBLY: CLUTCH COVER
  • Refitting the clutch cover
  • Reassembling the clutch cover
  • Disassembling the clutch cover
  • Removing the clutch cover
  • CLUTCH ASSEMBLY: PRIMARY DRIVE GEARS
  • Refitting the primary drive gears and checking backlash
  • Removing the primary drive gears
  • GEARBOX ASSEMBLY: GEARCHANGE MECHANISM
  • Refitting the gearchange mechanism
  • Refitting the gear interlock plunger and ratchet
  • Disassembling gear interlock plunger and ratchet
  • Removing the gearchange mechanism
  • GEARBOX ASSEMBLY: GEARBOX SHAFTS
  • Reassembling the gearbox assembly
  • Reassembling the gearbox shafts
  • Inspecting the fork selector drum
  • Inspecting the gear selector forks
  • Overhauling the gearbox
  • Disassembling the gearbox shafts
  • Removing the gearbox assembly
  • FLYWHEEL - GENERATOR
  • Refitting the generator cover
  • Refitting the flywheel-generator assembly
  • Overhauling the flywheel-generator assembly
  • Removing the flywheel - generator assembly
  • Disassembling the generator cover
  • Removing the generator cover
  • CRANKCASE ASSEMBLY: OUTER COMPONENTS
  • Refitting the starter motor gear
  • Removing the starter motor idler gear
  • Refitting the timing gears
  • Removing the timing gears
  • Refitting the external components
  • Removing outer components
  • CRANKCASE ASSEMBLY: CRANKCASE HALVES
  • Reassembling the crankcase halves
  • Shimming the shafts
  • Reassembling the crankcase halves
  • Main bearings
  • Overhauling the crankcase halves
  • Separating the crankcase halves
  • CRANKCASE ASSEMBLY: CONNECTING RODS
  • Refitting the connecting rod assembly
  • Reassembling the connecting rod assembly
  • Overhauling the connecting rods
  • Disassembling the connecting rod assembly
  • Removing the connecting rod assembly