2017-2022 Index
General Information & Workshop Repair
- Comprehensive service and repair documentation for the Lexus RX 350L (2017–2022).
- Detailed workshop information covering the 3.5L V6 2GR-FKS petrol engine, automatic transmissions, AWD drivetrain, steering, suspension, electrical systems, and bodywork.
- Includes additional engine technical sections for the 2.0L turbocharged 8AR-FTS petrol engine.
- Covers applicable 2WD and AWD, Left-Hand Drive (LHD), Right-Hand Drive (RHD), and second-row and third-row seating configurations.
- Electronic control system troubleshooting, mechanical repairs, component replacement, and technical specifications.
- Vehicle maintenance, workshop preparation, and repair reference information.
General Information & Scheduled Maintenance
- Vehicle identification and general repair instructions.
- Electronic Control Unit (ECU) troubleshooting procedures.
- Engine, chassis, brake, and body maintenance information.
- Interior, exterior, and under-hood inspections.
- Workshop preparation and technical specifications.
3.5L V6 Petrol Engine — 2GR-FKS
- Dedicated mechanical repair documentation for the 2GR-FKS V6 engine.
- Engine assembly, cylinder block, and cylinder heads.
- Camshaft assemblies and cylinder head gaskets.
- Drive belt and crankshaft oil seals.
- Engine mechanical inspection and component replacement.
- Engine maintenance and technical specifications.
2.0L Turbocharged Petrol Engine — 8AR-FTS
- Additional technical repair sections for the 8AR-FTS turbocharged engine.
- Engine mechanical components and cylinder head.
- Camshaft, cylinder block, and crankshaft seals.
- Turbocharger, intercooler, and wastegate actuator.
- Fuel injection, engine management, cooling, and lubrication.
- Engine technical specifications and servicing.
Engine Management & Electronic Fuel Injection
- Engine Control Module (ECM).
- Sequential Fuel Injection (SFI) systems.
- Direct and port fuel injectors.
- High-pressure fuel pumps and fuel pressure sensors.
- Electronic throttle body and accelerator pedal.
- Camshaft and crankshaft position sensors.
- Air-fuel ratio, oxygen, knock, and airflow sensors.
- Ignition coils, spark plugs, and ignition controls.
Fuel Delivery & Emission Control
- Fuel tank and fuel delivery system.
- Fuel pump and Fuel Pump ECU.
- Fuel sender gauge assembly.
- Direct and port injection fuel systems.
- Evaporative emission control and canister pump module.
- Fuel vapor canister, purge valve, and PCV valve.
- Emission control system inspection and servicing.
Engine Cooling System
- Radiator and cooling fan assemblies.
- Cooling Fan ECU.
- Water pump and thermostat.
- Coolant replacement and cooling system servicing.
- Engine cooling system components and sensors.
Engine Lubrication System
- Engine oil pump and oil cooler.
- Engine oil and filter replacement.
- Oil pressure sensors and switches.
- Oil level sensors.
- Lubrication system inspection and maintenance.
Engine Intake, Turbocharging & Exhaust
- Intake manifold and intake air control valves.
- Acoustic Control Induction System (ACIS) components.
- Exhaust manifold and exhaust pipes.
- Turbocharger and intercooler components for the 8AR-FTS.
- Wastegate actuator and associated cooling equipment.
Automatic Transmissions — U661E / U661F / U881E / U881F
- Dedicated technical repair sections for:
- U661E automatic transaxle.
- U661F automatic transaxle.
- U881E automatic transaxle.
- U881F automatic transaxle.
- Automatic transmission assembly and internal components.
- Torque converter and drive plate.
- Transmission valve body and oil pump.
- Automatic transmission fluid and oil cooling.
- Shift lever and paddle shift switches.
- Transmission speed sensors and control wiring.
- Transmission troubleshooting and servicing procedures.
AWD System, Transfer Case & Differentials
- Dynamic Torque Control AWD system.
- MF1A transfer assembly.
- Four-Wheel Drive Control ECU and switches.
- Transfer case servicing and oil seals.
- Front and rear axle hubs.
- Rear differential carrier assembly.
- Differential oil and sealing components.
Driveshafts & Propeller Shaft
- Front driveshaft assembly.
- Rear driveshaft assembly.
- Propeller shaft and associated components.
- Driveshaft system inspection and servicing.
- Drivetrain component removal and replacement.
Electric Power Steering & Steering Column
- Electric Power Steering system.
- Power Steering ECU.
- Steering gear and steering linkage.
- Steering column assembly.
- Power tilt and telescopic steering.
- Heated steering wheel system.
- Steering lock and steering wheel controls.
Front & Rear Suspension
- Front lower suspension arms and ball joints.
- Front shock absorbers and stabilizer bar.
- Front suspension member.
- Rear coil springs and suspension arms.
- Rear shock absorbers and stabilizer bar.
- Rear trailing arms and suspension members.
- Front and rear suspension inspection and repair.
Adaptive Variable Suspension — AVS
- Adaptive Variable Suspension (AVS) system.
- Front and rear electronically controlled shock absorber actuators.
- Suspension Control ECU.
- Suspension control switches.
- Front acceleration sensors.
- Adaptive suspension diagnostics and servicing.
Wheel Alignment, Tires & TPMS
- Front and rear wheel alignment.
- Suspension geometry and handling diagnosis.
- Tire and wheel servicing.
- Tire Pressure Monitoring System (TPMS).
- Tire pressure warning sensors, antennas, and receivers.
Cruise Control & Driver Assistance
- Conventional cruise control.
- Dynamic Radar Cruise Control.
- Millimeter-wave radar sensor.
- Forward recognition camera.
- Lane Keeping Assist / Lane Departure Alert (LKA/LDA).
- Road Sign Assist.
- Driving Support ECU and warning buzzer.
Pre-Crash Safety System
- Pre-Crash Safety electronic control system.
- Pre-crash warning buzzer.
- Safety system inspection and troubleshooting.
- Associated electronic sensors and controls.
Engine Stop & Start System
- Automatic engine Stop & Start system.
- Stop & Start ECU.
- Backup boost converter.
- Stop & Start cancellation switch.
- Vacuum sensor assembly.
- System diagnosis and servicing.
Battery, Starting & Charging Systems
- Starter motor and engine starting system.
- Alternator and charging system.
- 150A and 180A generator configurations.
- Battery current sensor.
- Charging system inspection and diagnosis.
CAN, LIN & Electronic Control Networks
- CAN communication system.
- LIN communication system.
- Network Gateway ECU.
- Main Body ECU.
- Integration relay and electrical power distribution.
- Electronic control module communication troubleshooting.
Audio, Multimedia & Rear Seat Entertainment
- Audio and visual systems with 8-inch and 12.3-inch displays.
- Radio receiver and stereo amplifier.
- Front, rear, and luggage compartment speakers.
- Rear Seat Entertainment system.
- Rear Seat Entertainment ECU.
- Audio connections, antennas, and multimedia components.
Navigation, Remote Touch & Telematics
- Navigation system and navigation receiver.
- Navigation antenna and hard disk drive.
- Multi-display system.
- Remote Touch controller.
- Vehicle telematics systems.
- G-Book-related configurations.
- Telematics transceiver and Mayday emergency equipment.
Parking Assistance & Camera Systems
- Lexus Parking Assist-Sensor system.
- Intelligent Clearance Sonar.
- Front and rear ultrasonic sensors.
- Parking Assist Monitor system.
- Parallel parking assistance configurations.
- Panoramic View Monitor.
- Front, rear, and side cameras.
- Blind Spot Monitor.
- Rear Cross Traffic Alert warning buzzer.
Exterior Bodywork & Power Tailgate
- Front and rear doors and body panels.
- Front and rear bumpers.
- Hood, roof rack, and exterior trim.
- Rear spoiler and wheel arch mouldings.
- Power Back Door system.
- Tailgate drive unit and closer system.
- Tailgate switches, sensors, and electronic controls.
Exterior Lighting & Headlight Systems
- Adaptive High Beam System (AHS).
- Automatic High Beam system.
- Automatic headlight leveling.
- Single-beam and triple-beam headlight configurations.
- Headlight ECU and lighting sensors.
- Front and rear lighting assemblies.
- Fog lights, indicators, and brake lights.
Electric Windows, Mirrors & Roof Systems
- Power window control system.
- Electric window regulator motors.
- Power exterior mirrors with and without memory.
- Sliding roof system.
- Panoramic Moonroof system.
- Windshield defogger and deicer.
- Rear window defogger and window glass servicing.
Wipers, Washers & Rain Sensor
- Front and rear windshield wiper systems.
- Rain sensor.
- Windscreen washer motors and nozzles.
- Headlight cleaning system.
- Wiper and washer controls and associated components.
Heating, Ventilation & Air Conditioning
- Automatic climate control system.
- Front and rear air conditioning units.
- Air conditioning compressor and condenser.
- Front and rear blower motors.
- Evaporator and refrigerant lines.
- HVAC sensors and electronic controls.
- PTC heater and ion generator.
- R134a and R1234yf refrigerant configurations, where applicable.
Front, Second-Row & Third-Row Seating
- Front power seat control systems.
- Front seat position memory functions.
- Heated and climate-controlled seats.
- Lumbar support adjustment.
- Second-row seat assemblies and adjustment mechanisms.
- Third-row seat assemblies and power controls.
- Rear seat heating and power adjustment systems.
- Seat-related electronic controls and switches.
Interior Equipment & Lighting
- Instrument panel and center console.
- Interior trim and roof headlining.
- Ambient lighting and courtesy lights.
- Footwell, luggage compartment, and vanity lighting.
- Interior electrical accessories.
- Garage door opener system.
Instrument Cluster & Head-Up Display
- Combination meter and instrument controls.
- Head-Up Display (HUD) system.
- Head-Up Display switch.
- Trip switch and clock.
- Meter and gauge system diagnostics.
Interior Power Outlets & Wireless Charging
- Front and rear console power outlets.
- Rear seat power sockets.
- Wireless charger assembly.
- Wireless charging system.
Airbags & Supplemental Restraint System
- Supplemental Restraint System (SRS).
- Front passenger airbag and steering wheel airbag components.
- Front and rear side airbags.
- Curtain shield airbags.
- Knee airbags and seat cushion airbag.
- Airbag sensors and control components.
- Occupant Classification ECU and system.
Seat Belts & Occupant Detection
- Front seat belt assemblies.
- Second-row and third-row seat belts.
- Seat belt warning system.
- Occupant detection sensors.
- Seat belt tension reducer system.
- Seat position sensors and related equipment.
Central Locking, Smart Entry & Anti-Theft
- Power door lock control system.
- Wireless door locking and transmitters.
- Smart Entry and Start system.
- Engine immobilizer system.
- Theft deterrent and intrusion detection.
- Security horn and tilt sensor.
- Electrical key oscillators and associated components.
Technical Specifications & Workshop Reference
- Engine and transmission technical specifications.
- Drivetrain, steering, and suspension service data.
- Electronic system diagnosis and troubleshooting.
- Component removal and installation procedures.
- Workshop preparation and repair instructions.
- Maintenance and technical reference information.
V6 & Turbo-4 Physical Teardowns
Modern multi-row luxury SUVs carry significant curb weight, placing immense stress on the driveline and powertrain hardware. In many engine rebuild cases involving the 3.5L 2GR-FKS, a common issue technicians encounter is ignoring the specific Form-In-Place Gasket (FIPG) application maps on the timing chain cover. Applying too much sealant or missing the precise installation time window results in severe oil leaks and compromised lubrication pressure.
This workshop guide details the complete mechanical disassembly of both the V6 block and the 2.0L 8AR-FTS turbocharged four-cylinder. You get the exacting clearance tolerances for main bearing journals, piston ring end gaps, and the multi-stage tightening sequences required for the cylinder head bolts to prevent block distortion. Furthermore, it explicitly dictates the physical mounting procedures for the turbocharger plumbing and intercooler routing on the 8AR-FTS.
Transaxle and Transfer Case Clearances
Transferring power to the pavement through the extended wheelbase requires a perfectly shimmed driveline. One frequent mistake during reassembly of the U881F AWD automatic transaxle is utilizing incorrect thrust washer thicknesses. This alters the internal planetary gear backlash, leading directly to premature clutch pack wear and harsh shifting.
This technical document lays out the step-by-step mechanical extraction of the transmission and the MF1A transfer assembly. It clearly defines the physical measurements for the transfer case front and rear oil seal seating depths, ensuring fluid isolation between the transmission and the differential carrier. Additionally, it details the mechanical alignment required when installing the front and rear propeller shafts to prevent high-speed driveline vibration.
Structural Chassis and Braking Hardware
Handling the mass of the three-row configuration demands a perfectly aligned suspension system. When servicing the Adaptive Variable Suspension (AVS) dampeners, applying final torque to the rear trailing arms while the vehicle is lifted completely tears the pivot bushings once the vehicle's weight settles on the alignment rack.
To prevent this, the manual provides the mandatory curb-weight tightening sequences for all independent suspension members. Additionally, it breaks down the mechanical teardown of the hydraulic brake booster pump, the master cylinder pushrod adjustments, and the physical mounting procedures for the mechanical parking brake cables, ensuring the base braking hardware operates flawlessly.
Three-Row Body and HVAC Plumbing
Because this resource specifically covers the extended "L" models (designated by components "W- Rear No. 2 Seat"), it includes the unique physical hardware configurations for the third-row seating tracks and dedicated rear air conditioning units.
Mechanics will find the structural mounting instructions for the rear evaporator core, mechanical blower motor housings, and physical refrigerant line routing from the engine bay to the rear cabin. It also covers the heavy mechanical removal of the panoramic moon roof housing and the structural hinges for the power back door, ensuring proper panel gap alignment during reassembly.
High-Performance Diagnostic Workspace
Wrestling with a massive physical binder while trying to measure a camshaft lobe destroys shop floor efficiency. At 30,172 pages and 865 MB, this digital reference is aggressively indexed for rapid mechanical retrieval. Mechanics can instantly locate specific torque specifications for the Dynamic Torque Control AWD system or zoom into high-resolution exploded views of the engine oil cooler plumbing. Buy repair manual PDF access today, skip the guesswork, and execute your mechanical overhauls with absolute structural confidence.
Shop Floor Fulfillment Protocol
A vehicle taking up space on your lift costs you money. Secure this vital mechanical data instantly via standard Credit Card, Apple Pay, Google Pay, or PayPal.
- Immediate Dispatch: As soon as your transaction clears, a secure download workshop manual PDF link is sent straight to your email and added to your permanent user portal.
- Flexible Access Window: You have a 10-day active period or up to 10 distinct downloads to save the heavy file locally to your diagnostic laptop.
- The Heavy-File Guarantee: Experiencing a timeout while pulling this 865 MB archive on shop Wi-Fi? Message us directly. We will spin up a private Dropbox connection to ensure your data arrives safely.
- Device Transfer Guide: Check out this quick 30-second walkthrough to save the file offline: https://servicemanuals.info/How-to-Download.mp4.
Frequently Asked Questions
What is the proper physical procedure for installing the timing chain on the 2GR-FKS V6?
The engine mechanical chapters comprehensively map out the entire front cover teardown. You will find the exact physical alignment marks for the camshaft timing gears, the necessary dial indicator measurements for chain stretch, and the mandatory torque specs for the tensioner mounting bolts to prevent valvetrain failure.
I need to tear down the U881F transaxle. Are the internal planetary gear clearances provided?
Yes. The drivetrain section includes the complete physical disassembly of the automatic transmission. It covers the mechanical extraction of the torque converter, the specific thickness selection for clutch pack thrust washers, and the mechanical alignment of the oil pump housing.
How do I safely remove the panoramic moon roof glass without bending the guide tracks?
The interior and exterior body chapters detail the full mechanical removal process. It outlines the specific hardware unbolting sequence for the sliding roof housing, the location of the drain tube plumbing, and the precise mechanical adjustments required to ensure the roof glass seals tightly against the weatherstripping.
Are the curb-weight tightening rules included for the rear suspension members?
Absolutely. To prevent premature bushing failure on the heavy three-row models, the chassis section dictates the exact curb-weight torque specifications for the rear trailing arms, upper control arms, and the physical mounting brackets for the performance dampers.