2019–2020 Index
- Kia Optima K5 (2019–2020).
- Workshop service and repair manual covering engine, automatic transmission, fuel injection, brakes, suspension, steering, bodywork and electrical systems.
- Advanced Driver Assistance Systems (ADAS), electronic control modules, safety systems and vehicle diagnostics.
- Detailed maintenance, inspection, component removal, installation and repair procedures.
General Information & Technical Reference
- Vehicle identification and general service information.
- Workshop safety precautions and service procedures.
- Vehicle lifting and supporting points.
- Towing procedures.
- Warning and caution labels.
- General workshop symbols and technical reference information.
Engine Mechanical Service & Overhaul
- Engine and transaxle assembly removal and installation.
- Engine mounting components.
- Cylinder head removal, inspection and servicing.
- Cylinder head cover and valve train components.
- Camshafts and Continuous Variable Valve Timing (CVVT) system.
- Cylinder block servicing.
- Crankshaft, pistons and connecting rods.
- Drive plate and crankshaft rear oil seal.
- Engine timing chain, timing chain cover and front oil seal.
- Engine drive belt, tensioner and idler.
- Crankshaft damper pulley.
Engine Cooling System
- Cooling system inspection and maintenance.
- Engine coolant replacement.
- Radiator and coolant reservoir.
- Cooling fan servicing.
- Thermostat and water pump.
- Water temperature control assembly.
- Cooling system component removal and installation.
Engine Lubrication System
- Engine oil inspection and replacement.
- Oil level gauge and dipstick tube.
- Engine oil pan.
- Oil pump servicing.
- Engine oil pressure switch.
- Lubrication system component inspection and repair.
Intake & Exhaust Systems
- Air cleaner and intake system components.
- Intake manifold removal and installation.
- Exhaust manifold servicing.
- Muffler and exhaust system components.
- Variable Intake Solenoid (VIS) actuator.
- Intake and exhaust system repair procedures.
Electronic Engine Management & Fuel Injection
- Engine Control Module (ECM).
- Electronic Throttle Control (ETC) system.
- Accelerator Position Sensor (APS).
- Crankshaft Position Sensor (CKPS).
- Camshaft Position Sensor (CMPS).
- Engine Coolant Temperature Sensor (ECTS).
- Knock Sensor (KS).
- Heated Oxygen Sensor (HO2S).
- Manifold Absolute Pressure Sensor (MAPS).
- Intake Air Temperature Sensor (IATS).
- CVVT Oil Control Valve (OCV).
- Variable Charge Motion Actuator (VCMA).
- Variable Intake Solenoid (VIS) valve.
Fuel Delivery System
- Fuel tank and fuel filler assembly.
- Fuel pump and fuel pump module.
- Fuel filter and fuel pressure regulator.
- Fuel injectors and delivery pipe.
- Fuel lines and related connections.
- Fuel level sender.
- Fuel supply component removal, inspection and installation.
Emission Control Systems
- Positive Crankcase Ventilation (PCV) system.
- Evaporative Emission Control System (EVAP).
- EVAP canister and fuel tank air filter.
- Purge Control Solenoid Valve (PCSV).
- Fuel filler cap and evaporative system components.
- Catalytic converter.
- CVVT-related exhaust emission control.
Engine Electrical System
- Battery and battery sensor.
- Alternator and charging system.
- Ignition coils and spark plugs.
- Starter motor and starter relay.
- Charging, ignition and starting system inspection.
- Engine electrical component servicing.
Automatic Transaxle & Electronic Control
- Automatic transaxle assembly.
- Transaxle Control Module (TCM).
- Automatic transmission speed sensor.
- Transaxle oil temperature sensor.
- Inhibitor switch.
- Gear selector lever and shift cable.
- Automatic transmission control system.
- Transaxle fluid inspection and servicing.
Automatic Transmission Hydraulic System
- Automatic transmission hydraulic control system.
- Valve body servicing.
- Transmission oil pump.
- Line Pressure Control Solenoid Valve.
- Torque Converter Control Solenoid Valve.
- Overdrive Clutch Control Solenoid Valve.
- Underdrive Brake Control Solenoid Valve.
- 26 Brake Control Solenoid Valve.
- 35R Clutch Control Solenoid Valve.
- SS-A ON/OFF Solenoid Valve.
- Transmission hydraulic component inspection and repair.
Driveshafts & Axles
- Front driveshaft removal and installation.
- Transaxle-side constant velocity joint.
- Wheel-side constant velocity joint.
- Front axle assembly.
- Rear hub and carrier.
- Driveshaft component inspection and servicing.
Brake System & Electronic Stability Control
- Brake booster and master cylinder.
- Hydraulic brake lines.
- Brake pedal and stop lamp switch.
- Front and rear brake pads.
- Front and rear brake discs.
- Front and rear brake calipers.
- Electronic Stability Control (ESC) system.
- ESC Control Module and ESC OFF switch.
- Front and rear wheel speed sensors.
- Emergency Signal System.
- Electric Parking Brake (EPB).
- Parking brake cables and pedal assembly.
Electric Power Steering
- Motor Driven Power Steering (MDPS) system.
- MDPS steering column and housing.
- Steering gearbox.
- Steering wheel removal and installation.
- Heated steering wheel.
- Electric steering system component servicing.
Front & Rear Suspension
- Front suspension lower arms.
- Front strut assemblies.
- Front stabilizer bar.
- Front suspension subframe.
- Rear suspension lower and upper arms.
- Rear trailing arms and assist arms.
- Rear coil springs and shock absorbers.
- Rear stabilizer bar and subframe.
- Suspension component removal, inspection and installation.
Wheels, Tyres & TPMS
- Wheel alignment procedures.
- Wheel and tyre inspection.
- Tyre Pressure Monitoring System (TPMS).
- TPMS receiver.
- Tyre pressure sensors.
- Wheel and tyre servicing.
Advanced Driver Assistance Systems (ADAS)
- Conventional Cruise Control (CC).
- Smart Cruise Control (SCC).
- Front radar system and Front Radar Unit.
- Front View Camera System.
- Lane Keeping Assist (LKA).
- Parking Collision-Avoidance Assist (PCA).
- Parking Distance Warning (PDW).
- Parking distance warning sensors and switches.
- Rear Corner Radar System.
- Blind-Spot Collision Warning (BCW) indicators.
- Rear Cross-Traffic Collision-Avoidance Assist (RCCA) indicators.
- Rear View Monitor (RVM).
- Surround View Monitor (SVM).
- Surround View Monitor cameras, ECU and switches.
Body Electrical Control Systems
- Integrated Body Control Unit (IBU).
- Integrated Central Control Unit (ICU).
- Engine compartment junction block.
- Fuses and relays.
- Smart Key System and Smart Key Unit.
- Smart Key antennas and diagnostic procedures.
- Push-button engine starting system.
- Electronic Steering Column Lock (ESCL).
- Keyless entry and burglar alarm system.
- Ignition switch assembly.
Audio, Navigation & Communication
- Audio and AV Navigation (AVN) system.
- Audio head unit and navigation equipment.
- External amplifier.
- Speakers, antenna and microphone.
- Multimedia connection ports.
- Steering Wheel Remote Controller (SWRC).
- Emergency Call (eCall) system.
- Emergency Call Unit and switch.
Instrumentation & Driver Information
- Instrument cluster and gauges.
- Head-Up Display (HUD).
- Automatic lighting sensor.
- Headlamp levelling system.
- Multifunction switches.
- Vehicle information and indication systems.
Lighting & Exterior Electrical Equipment
- Headlamp assemblies and headlamp levelling.
- Front fog lamps.
- Rear combination lamps.
- High-mounted stop lamp.
- Hazard warning light switch.
- Licence plate lighting.
- Interior and exterior lighting controls.
- Horn system.
- Automatic lighting control.
Interior Electrical & Convenience Systems
- Electric door locking system.
- Power door lock modules and switches.
- Power window motors and switches.
- Electrically adjustable exterior mirrors.
- Electrochromic interior rear-view mirror.
- Rear window defogger.
- Electric fuel filler door release.
- USB charging system.
- Wireless Power Charger (WPC).
- Wireless charging indicator.
- Rain sensor and automatic wiper system.
- Windshield wiper motor, washer motor and switches.
Power Seats & Interior Comfort
- Electric front seat adjustment.
- Power seat motors and control switches.
- Integrated Memory Seat (IMS) system.
- Driver's seat memory controls.
- Seat lumbar support.
- Heated front seats.
- Ventilated and heated seat systems.
- Relaxation Comfort Seat.
- Walk-in seat control switch.
Heating, Ventilation & Air Conditioning (HVAC)
- Air conditioning system inspection and servicing.
- Compressor and compressor oil.
- Condenser and receiver-drier.
- Refrigerant lines and pressure transducer.
- Evaporator and heater core.
- Blower motor and blower resistor.
- Climate control air filter.
- Dual Automatic Temperature Control (DATC).
- Manual air conditioning control system.
- Heater and A/C control modules.
- Ambient, in-car and evaporator temperature sensors.
- Automatic defogging sensor and actuator.
- Intake, mode and temperature control actuators.
- Climate control power MOSFET.
- Cluster ionizer.
Supplemental Restraint System (SRS)
- Driver airbag and clock spring.
- Passenger airbag.
- Side airbag modules.
- Curtain airbag modules.
- SRS Control Module (SRSCM).
- Front impact sensors.
- Side impact sensors.
- Seat belt pretensioners.
- SRS component removal and installation.
Exterior Bodywork & Panels
- Front and rear bumper assemblies.
- Bumper reinforcement beams.
- Radiator grille.
- Front fenders and mud guards.
- Front and rear wheel guards.
- Hood, hood latch and release mechanism.
- Front and rear door assemblies.
- Door handles, latches and weatherstrips.
- Fuel filler door.
- Trunk lid, hinges, latch and trim.
- Windshield and rear window glass.
- Exterior body mouldings and side sill trim.
Panoramic Sunroof
- Panoramic sunroof assembly.
- Front, rear and movable glass panels.
- Sunroof mechanism rails.
- Sunroof deflector.
- Electric sunroof motor and switch.
- Roller blind and blind cable assembly.
- Sunroof component servicing.
Interior Trim & Seat Assemblies
- Dashboard and crash pad assembly.
- Instrument cluster fascia and dashboard panels.
- Cowl cross bar.
- Glove box and floor console.
- Front seat assemblies, frames and covers.
- Rear seat assemblies and upholstery.
- Front and rear seat belts.
- Seat belt buckles, retractors and height adjustment.
- Door trim and pillar trim.
- Roof lining, sun visors and assist handles.
- Floor carpeting.
- Trunk trim and luggage compartment panels.
Scheduled Maintenance & Inspection
- Maintenance schedules for normal operating conditions.
- Maintenance schedules for severe operating conditions.
- Engine oil and oil filter replacement.
- Air cleaner and spark plug maintenance.
- Engine coolant and cooling system inspection.
- Automatic transmission fluid servicing.
- Drive belt inspection.
- Battery inspection and maintenance.
- Fuel lines, hoses and connections.
- Brake fluid, brake pads and discs.
- Steering gear, suspension ball joints and mounting bolts.
- Driveshaft joints and protective boots.
- Tyre pressure, wear and condition.
- Air conditioning refrigerant and compressor inspection.
- Climate control air filter replacement.
Technical Service & Repair Information
- Engine and automatic transmission repair procedures.
- Electrical component inspection and servicing.
- Electronic control module and sensor references.
- Brake, steering and suspension component repair.
- ADAS radar, camera and parking assistance components.
- Body electrical equipment and convenience systems.
- Air conditioning and climate control components.
- SRS airbag and seat belt systems.
- Workshop maintenance procedures and technical service information.
In-Bay Realities & Diagnostic Precision
High-tech driver safety electronics and variable valvetrain engines demand absolute accuracy from the moment a vehicle crosses the shop bay door. During troubleshooting, assuming a shifting lag is simply an old transaxle fluid issue without reading the transaxle oil temperature sensor input can lead to massive component wear. The 2019 to 2020 executive sedan requires an integrated diagnostic path that charts how different systems interact, from the electronic throttle control system to advanced ADAS radar arrays. Bypassing factory instructions or forcing random parameters during sensor alignment ensures errors that can render the vehicle highly unstable on the road.
Powertrain Architecture & Tolerance Standards
A common issue technicians encounter during an engine rebuild guide procedure is a baseline oil pressure drop resulting from poorly aligned balancing shafts or out-of-spec journal clearances. In many engine rebuild cases involving the 2.0 MPI and 2.4 MPI architectures, attempting to seat the crankshaft or pistons without verifying the exact factory clearance tolerances causes rapid bearing breakdown and oil pump fatigue.
Cylinder Head cover assembly → CVVT & Camshaft Inspection → Timing Chain Alignment
One frequent mistake during reassembly is applying improper lubrication points or pulling the continuous variable valve timing (CVVT) oil control valves out of order without preserving the manufacturer's exact tightening sequences. This 2,287-page technical document delivers every crucial dimension, offering crisp diagrams for cross-sectional cylinder block tolerances, timing chain tensioner retraction paths, and multi-stage cylinder head torque values.
Drivetrain & Automatic Transaxle Teardowns
Handling automatic transaxle operations requires strict adherence to clean-room practices and precise pressure control measurements. If you are tracking down a hard clutch engagement or an unexpected slippage, this workshop reference maps out the specific voltage loops for the 35R clutch control solenoid and overdrive clutch control valves.
Symptom: 35R Clutch Slip → Analysis: Solenoid Resistance Test → Solution: Valve Body Overhaul
Tolerance deviations inside the automatic transaxle valve body directly trigger hydraulic fluid drops, which will quickly burn up internal friction plates. Through this resource, mechanics get a full engineering breakdown of complete oil pump removals, shift cable linkages, and internal inhibitor switch calibrations to restore crisp gear selection.
Chassis Geometry & Active Radar Integration
Altering any major part of the front suspension system or drop-mounting the subframe permanently affects the vehicle's spatial alignment. For this reason, replacing a basic lower control arm or front strut assembly necessitates recalibrating the front view camera and smart cruise control (SCC) radar systems. This factory repair manual PDF lays out the correct torque specifications for suspension mounting bolts, trailing arms, and steering gearboxes. Therefore, you can complete complex structural tear-downs while keeping the electronic stability control (ESC) and lane-keeping assist networks fully calibrated.
Digital Manual Usability Features
Struggling with slow software or loading unindexed documents stalls production bays. This 396 MB service manual is rendered into a clean, searchable PDF that loads instantly on tablets, laptops, or tough-books across the shop floor. Technicians can zoom deeply into advanced electrical harnesses, follow step-by-step assembly procedures on the workbench, and easily reference cross-system data points without leaving the car side.
Shop Floor Guarantee: Access & Checkout
Our priority is eliminating down-time on your automotive lift. Complete your order using PayPal, Credit Card, Google Pay, or Apple Pay to get immediate access service manual delivery. A secured download link populates in your customer account panel and drops directly to your email address instantly. This active download link remains valid for 10 days or up to 10 separate downloads. As a part of our workshop delivery guarantee, if your regional internet connection drops out or the file corrupts, we will supply a permanent secure storage mirror via Dropbox. Review the step-by-step digital download instructions here: https://servicemanuals.info/How-to-Download.mp4
Get immediate access to the full service manual and start diagnosing with precision.
Practical Diagnostic Use Cases (FAQ)
What is the correct procedure for tracking intermittent faults in the smart cruise control (SCC) front radar?
The ADAS chapter details specific alignment steps, terminal resistance maps for the front radar unit, and complete wiring loops back to the main communication module. This allows technicians to locate broken circuits and isolate mechanical brackets that are warped out of positional tolerance bounds.
Does this document outline the internal disassembly of the MPI oil pumps?
Yes. The engine mechanical system section provides an exhaustive teardown path for both the 2.0 and 2.4 MPI setups, highlighting the internal rotor clearances, matching marks, and oil pressure switch torque specifications necessary to protect the bottom end from oil starvation.
How do I address a fault reading on the transaxle oil temperature sensor?
The automatic transaxle control system section walks you through testing the primary harness resistance. It contains an engineering breakdown for removing the main fluid pan, releasing the valve body safely, and replacing the sensor while maintaining exact factory torque limits during reassembly.