• -$10.00
Ducati Multistrada 1200 S Granturismo - Service Manual with Wiring Diagram
search
  • Ducati Multistrada 1200 S Granturismo - Service Manual with Wiring Diagram

Ducati Multistrada 1200 S Granturismo - Service Manual with Wiring Diagram

$29.95
$19.95 Save $10.00
No tax
Quantity

YOUTUBE Official Channel @SoloPDFcom (+18,000 subs). Trusted by mechanics worldwide using professional workshop manuals and wiring diagrams.

Ducati Multistrada 1200 S Granturismo — Service Manual with Wiring Diagram

This download contains service and repair information with an indexed wiring diagram for Ducati Multistrada 1200 S Granturismo. The original technical index is retained below; indexed system names do not imply unlisted procedures.

Original document details

  • Full Service Manual & Repair Guide for motorcycle Ducati Multistrada 1200 S Granturismo.

Selected indexed topics: WIRING DIAGRAM; Adjusting the clutch lever and front brake lever; Engine tightening torque values.

Original technical index

  • MTS.01 - GENERAL
  • SYMBOLS - ABBREVIATIONS - REFERENCES
  • - Product specifications
  • HAZARDOUS PRODUCTS - WARNINGS
  • - General maintenance instructions
  • - General safety rules
  • MTS.02 - INFORMATION ABOUT THE MODEL
  • MODEL IDENTIFICATION DATA
  • - Identification data
  • MTS.03 - TECHNICAL DATA
  • TECHNICAL SPECIFICATIONS
  • - Lights/instrument panel
  • - Injection system
  • - Fuel system
  • - Injection-ignition system
  • - Charging system/generator
  • - Hydraulic brakes
  • - Rear suspension
  • - Rear wheel
  • - Front suspension
  • - Front wheel
  • - Cooling system
  • - Gearbox
  • - Cylinder/Piston
  • - Crankshaft
  • - Timing system/valves
  • - Transmission
  • - Colours
  • - General
  • DIMENSIONS
  • - Dimensions
  • FUEL, LUBRICANTS AND OTHER FLUIDS
  • - Fuel, lubricants and other fluids
  • TIGHTENING TORQUE VALUES
  • - Engine tightening torque values
  • - Frame tightening torque values
  • MTS.04 - MAINTENANCE OPERATIONS
  • VEHICLE PRE-DELIVERY
  • - Assembly - packaging
  • - Side pannier lock assembly
  • - Vehicle pre-delivery
  • SCHEDULED MAINTENANCE CHART
  • - Operations-be carried out by the customer
  • - Operations-be carried out by the dealer
  • MAINTENANCE OPERATIONS
  • - Adjusting vehicle setup
  • - Adjusting the rear shock absorber
  • - Adjusting the front fork
  • - Adjusting the position of the gear change and rear brake pedals
  • - Adjusting the clutch lever and front brake lever
  • - Checking the rear brake pad wear and changing the brake pads
  • - Checking the front brake pad wear and changing the brake pads
  • - Adjusting the chain tension
  • - Adjusting the steering head bearing play
  • - Adjusting the clutch control cable
  • - Filling the clutch circuit
  • - Draining the clutch hydraulic circuit
  • - Changing the clutch fluid
  • - Changing the fluid in the rear brake system
  • - Changing the fluid in the front brake system
  • - Changing the coolant
  • - Checking the coolant level
  • - Changing and cleaning the air filters
  • - Spark plugs replacement
  • - Changing the timing belts
  • - Checking valve clearance
  • - Changing the engine oil and filter cartridge
  • - Check engine oil level
  • ACCESSORIES
  • - Supplied accessory kit
  • - Assembling the filler plug lock
  • - Removing the filler plug lock
  • - Pannier bottom and low lid kit
  • - Cover kit
  • - Elastic elements kit
  • - Side panniers kit
  • - Side panniers kit
  • MTS.05 - FAIRINGS
  • PANEL - HEADLIGHT FAIRING
  • - Refitting the headlight fairing
  • - Removing the headlight fairing
  • - Refitting the panel
  • - Removing the panel
  • FAIRINGS
  • - Refitting the fuel tank fairings
  • - Refitting the front half-fairing
  • - Removing the front half-fairing
  • - Removing the front half-fairing
  • SEAT - TAIL GUARD AND FAIRINGS
  • - Side Body Panel and Tail Guard Reassembly
  • - Side Body Panel and Tail Guard Removal
  • - Refitting the seat
  • - Removing the seat
  • FRONT MUDGUARD - UNDERSUMP
  • - Refitting the undersump
  • - Removing the undersump
  • - Front semi-mudguard kit
  • - Refitting the front mudguard
  • - Removing the front mudguard
  • REAR MUDGUARD - SPLASHGUARD
  • - Refitting the splash guard
  • - Removing the splash guard
  • - Long rear mudguard kit
  • - Refitting the rear mudguard
  • - Removing the rear mudguard
  • MTS.06 - ELECTRIC SYSTEM AND ENGINE MANAGEMENT
  • WIRING DIAGRAM
  • - Table T
  • - Table S
  • - Table R
  • - Table P
  • - Table O
  • - Table N
  • - Table M
  • - Table L
  • - Table K
  • - Table J
  • - Table I
  • - Table H
  • - Table G
  • - Table F
  • - Table E
  • - Table D
  • - Table C
  • - Table B
  • - Table A
  • - Routing of wiring on frame
  • - Key-fuse box
  • - Wiring diagram colour codes
  • - Key-wiring diagram
  • BATTERY CHARGING SYSTEM
  • - Rectifier-regulator
  • - Generator
  • - Battery
  • - Topping up the electrolyte
  • - Recharging the battery
  • - Checking the battery charging system
  • ELECTRIC STARTING
  • - Solenoid starter
  • - Starter motor
  • - Electric starting system
  • LIGHTS
  • - Headlight aim
  • MTS.07 - CHASSIS
  • FRONT WHEEL
  • - Refitting the front wheel
  • - Overhauling the front wheel
  • - Removing the front wheel
  • REAR WHEEL
  • - Refitting the rear wheel
  • - Overhauling the rear wheel
  • - Removing the rear wheel
  • FRONT BRAKE CONTROL
  • - Refitting the front brake system
  • - Refitting the brake discs
  • - Overhauling the front brake components
  • - Removing the brake discs
  • - Removing the front brake system
  • - Maintenance operations
  • - Refitting the front brake master cylinder
  • - Removing the front brake master cylinder
  • REAR BRAKE
  • - Refitting the rear brake calliper
  • - Removing the rear brake disc
  • - Removing the rear brake calliper
  • - Refitting the rear brake control
  • - Disassembling the rear brake control
  • - Removing the rear brake control
  • ABS INFORMATION
  • - Disabling the ABS
  • - ABS operating information
  • - Operating principle
  • ABS COMPONENTS
  • - Wiring/hose routing
  • - Refitting the ABS control unit
  • - Removing the ABS control unit
  • - Changing the rear phonic wheel sensor
  • - Changing the front phonic wheel sensor
  • ABS COMPONENT MAINTENANCE
  • - Bleeding the ABS hydraulic system
  • - Adjusting the phonic wheel sensor AIR-GAP
  • HANDLEBAR UNIT: HAND GUARD - REAR.VIEW MIRRORS - THROTTLE CONTROL
  • - Refitting the handlebar
  • - Removing the handlebar
  • - Refitting the hand guards
  • - Removing the hand guards
  • - Refitting the rear-view mirrors
  • - Removing the rear-view mirrors
  • ADJUSTING THE THROTTLE CABLE
  • - Refitting the throttle twistgrip
  • - Removing the throttle twistgrip
  • HANDLEBAR UNIT: HYDRAULIC CLUTCH CONTROL
  • - Refitting the clutch transmission unit
  • - Removal of the clutch transmission unit
  • - Refitting the clutch master cylinder assembly
  • - Removal of the clutch master cylinder assembly
  • HANDLEBAR UNIT: HANDS FREE
  • - Refitting the Hands Free
  • - Removing the Hands Free
  • GEARCHANGE MECHANISM
  • - Refitting the gearchange mechanism
  • - Disassembling the gearchange control
  • - Removing the gearchange mechanism
  • FORK - STEERING HEAD: FRONT FORK
  • - Refitting the front forks
  • - Overhauling the front forks
  • - Removal of the front forks
  • FORK - STEERING HEAD: STEERING
  • - Refitting the steering tube components
  • - Removing the steering head components
  • - Steering angle adjustment
  • - Adjusting the steering head bearing clearance
  • REAR SHOCK ABSORBER UNIT
  • - Refitting the rear suspension
  • - Overhauling the rear shock absorber
  • - Removing the rear shock absorber
  • - Rear suspension system
  • SWINGING ARM
  • - Refitting the rear swinging arm
  • - Overhauling the rear swinging arm
  • - Inspecting the swinging arm shaft
  • - Removing the swinging arm
  • - Refitting the rear wheel eccentric hub and rear wheel shaft
  • - Removing the rear wheel eccentric hub and the rear wheel shaft
  • FINAL DRIVE
  • - Lubricating the chain
  • - Washing the chain
  • - Refitting the rear sprocket
  • - Replacing the rear sprocket
  • - Refitting the front sprocket
  • - Removing the front sprocket
  • - Inspecting the final drive
  • FOOTPEG BRACKETS
  • - Refitting the footpegs
  • - Removing the footpegs
  • STANDS
  • - Refitting the central stand
  • - Removing the central stand
  • - Refitting the side stand
  • - Removing the side stand
  • FRAME INSPECTION
  • - Refitting the side plates
  • - Removing the side plates
  • - Refitting the rear subframe
  • - Removal of the rear subframe
  • - Refitting the headlight assembly
  • - Removing of the headlight assembly
  • - Reassembling structural components and frame
  • - Checking the frame
  • - Disassembling structural components and frame
  • TAIL LIGHT - NUMBER PLATE HOLDER
  • - Refitting the number plate holder
  • - Removing the number plate holder
  • ELECTRICAL COMPONENT TRAY
  • - Refitting the electrical component tray
  • - Removing the electrical component tray
  • MTS.08 - FUEL SYSTEM / EXHAUST SYSTEM
  • FUEL TANK
  • - Refitting the fuel tank flange
  • - Removing the tank flange
  • - Refitting the filler cap
  • - Removing the filler cap
  • - Refitting the fuel tank
  • AIRBOX V THROTTLE BODY
  • - Refitting airbox and throttle body
  • - Removing the airbox and throttle body
  • AIR INTAKE
  • - Refitting the secondary air system
  • - Removing the secondary air system
  • - Refitting the air filters
  • - Removing the air filters
  • EXHAUST SYSTEM
  • - Refitting the exhaust system
  • - Removing the exhaust system
  • - Refitting the silencer
  • - Removing the silencer
  • CANISTER FILTER
  • - Refitting the Canister filter
  • - Removing the Canister filter
  • - Canister filter system
  • MTS.09 - ENGINE
  • REMOVING VREFITTING THE ENGINE ASSEMBLY
  • - Refitting the engine
  • - Removing the engine
  • LUBRICATION SYSTEM: OIL PUMP
  • - Refitting the oil pump
  • - Reassembling the oil pump
  • - Disassembling the oil pump
  • - Removing the oil pump
  • LUBRICATION SYSTEM: OIL COOLER
  • - Refitting the lubrication system
  • - Oil cooler inspection
  • - Removing the lubrication system
  • LUBRICATION SYSTEM: OIL BREATHER TANK
  • - Refitting the oil breather tank
  • - Removal of the oil breather tank
  • COOLING SYSTEM: WATER TANK
  • - Refitting the water tank
  • - Removing the water tank
  • COOLING SYSTEM: WATER RADIATOR
  • - Refitting the cooling system hoses and unions
  • - Removing the cooling system hoses and unions
  • - Refitting the water radiator
  • - Replacing the cooling fan
  • - Removing the water radiator
  • COOLING SYSTEM: WATER PUMP
  • - Refitting the water pump
  • - Removing the water pump
  • CYLINDER HEAD ASSEMBLY: CHECKS AND ADJUSTMENTS
  • - Checking the engine timing
  • - Checking valve lift
  • - Checking and adjusting the valve clearance
  • CYLINDER HEAD ASSEMBLY: TIMING SYSTEM
  • - Refitting the timing outer covers
  • - Refitting the timing belts
  • - Refitting the cylinder heads pulleys/idler pulleys
  • - Reassembling the timing pulleys
  • - Refitting the idler and tensioner pulley mounting pins
  • - Refitting the timing layshaft pulley
  • - Removing the timing layshaft pulleys
  • - Disassembling the camshaft pulleys
  • - Removing the tensioner pins
  • - Removing the cylinder head pulley/idler pulley
  • - Removing the tensioner pulley/timing belt
  • - Removing the timing belt covers
  • CYLINDER HEAD ASSEMBLY: CAMSHAFTS
  • - Refitting the intake manifold and water union
  • - Removing the intake manifold and water union
  • - Refitting the camshafts
  • - Checking the camshafts and supports
  • - Removing the camshafts
  • CYLINDER HEAD ASSEMBLIES: VALVES - ROCKER ARMS
  • - Refitting the cylinder head assemblies
  • - Reassembling the cylinder head
  • - Overhauling the cylinder head components
  • - Removing the valve rocker arms
  • - Removing the valves
  • - Removing the cylinder heads
  • CYLINDER/PISTON ASSEMBLY
  • - Refitting the cylinder/piston assembly
  • - Overhauling the cylinder/piston components
  • - Removing the cylinder/piston assembly
  • CLUTCH ASSEMBLY: CLUTCH
  • - Reassembling the clutch
  • - Checking and overhauling the components
  • - Removing the clutch
  • - Description of the clutch assembly
  • CLUTCH ASSEMBLY: CLUTCH COVER
  • - Refitting the clutch cover
  • - Reassembling the clutch cover
  • - Disassembling the clutch cover
  • - Removing the clutch cover
  • CLUTCH ASSEMBLY: PRIMARY DRIVE GEARS
  • - Refitting the primary drive gears and checking backlash
  • - Removing the primary drive gears
  • GEARBOX ASSEMBLY: GEARCHANGE MECHANISM
  • - Refitting the gearchange mechanism
  • - Refitting the gear interlock plunger and ratchet
  • - Disassembling gear interlock plunger and ratchet
  • - Removing the gearchange mechanism
  • GEARBOX ASSEMBLY: GEARBOX SHAFTS
  • - Reassembling the gearbox assembly
  • - Reassembling the gearbox shafts
  • - Inspecting the fork selector drum
  • - Inspecting the gear selector forks
  • - Overhauling the gearbox
  • - Disassembling the gearbox shafts
  • - Removing the gearbox assembly
  • FLYWHEEL - GENERATOR
  • - Refitting the generator cover
  • - Refitting the flywheel-generator assembly
  • - Overhauling the flywheel-generator assembly
  • - Removing the flywheel - generator assembly
  • - Disassembling the generator cover
  • - Removing the generator cover
  • CRANKCASE ASSEMBLY: OUTER COMPONENTS
  • - Refitting the starter motor gear
  • - Removing the starter motor idler gear
  • - Refitting the timing gears
  • - Removing the timing gears
  • - Refitting the external components
  • - Removing outer components
  • CRANKCASE ASSEMBLY: CRANKCASE HALVES
  • - Reassembling the crankcase halves
  • - Shimming the shafts
  • - Reassembling the crankcase halves
  • - Main bearings
  • - Overhauling the crankcase halves
  • - Separating the crankcase halves
  • CRANKCASE ASSEMBLY: CONNECTING RODS
  • - Refitting the connecting rod assembly
  • - Reassembling the connecting rod assembly
  • - Overhauling the connecting rods
  • - Disassembling the connecting rod assembly
  • Removing the connecting rod assembly