• -$10.00
Chrysler Voyager / Grand Voyager Service & Repair Manual 1996-2000 PDF
search
  • Chrysler Voyager / Grand Voyager Service & Repair Manual 1996-2000 PDF
  • Chrysler Voyager / Grand Voyager Service & Repair Manual 1996-2000 PDF

Chrysler Voyager / Grand Voyager Service & Repair Manual 1996-2000 PDF

$29.95
$19.95 Save $10.00
No tax

Quantity

YOUTUBE Official Channel @SoloPDFcom (+18,000 subs). Trusted by mechanics worldwide using professional workshop manuals and wiring diagrams.

1996-2000 Index

General Information & Workshop Repair

  • Comprehensive service and repair manual for the Chrysler Voyager (1996–2000).
  • Workshop documentation covering petrol and diesel engines, manual and automatic transmissions, cooling, fuel systems, suspension, steering, brakes, and bodywork.
  • Detailed electrical wiring diagrams, connector pinouts, component locations, and diagnostic procedures.
  • Repair information for applicable front-wheel-drive (FWD) and all-wheel-drive (AWD) configurations.
  • Technical specifications, tightening torques, maintenance schedules, special tools, and component repair procedures.

General Information & Vehicle Identification

  • Vehicle Identification Number (VIN) identification and decoding.
  • Vehicle certification labels and body code plates.
  • Fastener identification and strength classifications.
  • Metric conversions and tightening torque references.
  • Workshop safety and general servicing information.

Engines Covered — Mechanical & Electronic Systems

  • 2.0L SOHC Petrol Engine.
  • 2.4L Petrol Engine.
  • 3.0L V6 Petrol Engine.
  • 3.3L V6 Petrol Engine.
  • 3.8L V6 Petrol Engine.
  • 2.5L VM Diesel Engine.
  • Engine-specific mechanical repair, cooling, ignition, fuel delivery, and maintenance information.

Engine Mechanical Repair & Overhaul

  • Engine mechanical inspection, diagnosis, and repair.
  • Cylinder block, cylinder heads, and internal engine components.
  • Crankshaft, pistons, connecting rods, and valve train servicing.
  • Engine component removal and installation.
  • Mechanical repair specifications and service procedures.

Engine Cooling System

  • Radiator, water pump, thermostat, and cooling system components.
  • Engine cooling fan operation and testing.
  • Cooling system pressure testing and leak diagnosis.
  • Coolant draining, refilling, and system cleaning.
  • Accessory drive belts and belt tension adjustments.
  • Dedicated cooling procedures for petrol and diesel engines.

Fuel Delivery & Fuel System

  • Petrol and diesel fuel delivery systems.
  • Fuel supply components and related servicing.
  • Fuel system inspection and troubleshooting.
  • Dedicated 2.5L diesel and 2.0L petrol fuel system sections.

Ignition & Engine Electronic Controls

  • Powertrain Control Module (PCM).
  • Ignition coils, spark plugs, and ignition cables.
  • Camshaft and crankshaft position sensors.
  • Manifold Absolute Pressure (MAP) sensor.
  • Throttle Position Sensor (TPS).
  • Engine coolant and intake air temperature sensors.
  • Ignition system diagnosis and component replacement.

Engine Exhaust, Intake & Emission Control

  • Exhaust system and intake manifold servicing.
  • Emission control system operation and diagnosis.
  • Malfunction Indicator Lamp (MIL).
  • Diagnostic Trouble Codes (DTCs).
  • Emission system monitoring and component testing.

Manual Transmission & Clutch Systems

  • A-598 manual transaxle.
  • A-558 manual transaxle for applicable right-hand-drive configurations.
  • Manual gearbox identification, gear ratios, and lubricant specifications.
  • Gear selection, transmission servicing, and fault diagnosis.
  • Clutch assembly, clutch cable, and hydraulic clutch controls.
  • Clutch inspection, adjustment, and replacement procedures.

Automatic Transmission & Power Transfer Unit

  • 31TH automatic transaxle.
  • Automatic transmission hydraulic control system.
  • Torque converter and torque converter clutch.
  • Valve body, transmission clutches, and internal components.
  • Automatic transmission fluid and filter servicing.
  • Hydraulic pressure testing and fault diagnosis.
  • Transmission removal, overhaul, and reassembly.
  • Power transfer unit and related drivetrain servicing.

Front & Rear Suspension

  • MacPherson front suspension system.
  • Front struts, coil springs, lower control arms, and ball joints.
  • Steering knuckles, stabilizer bars, and wheel hubs.
  • Rear springs, shock absorbers, and suspension components.
  • Rear track bar and stabilizer bar.
  • Suspension repair procedures for FWD and AWD configurations.

Wheel Alignment, Tires & Wheels

  • Front and rear wheel alignment.
  • Caster, camber, and toe adjustments.
  • Suspension and steering diagnosis.
  • Wheel hub and bearing inspection.
  • Tire and wheel servicing information.

Hydraulic Braking System

  • Front disc brakes and rear drum or disc brake configurations.
  • Brake master cylinder and vacuum booster.
  • Brake calipers, pads, shoes, and wheel cylinders.
  • Brake hydraulic lines, hoses, and proportioning valves.
  • Brake fluid servicing and hydraulic circuit bleeding.
  • Parking brake components, cables, and adjustments.

Antilock Braking System — ABS

  • Teves Mark 20 Antilock Braking System.
  • ABS hydraulic control unit and electronic controller.
  • Wheel speed sensors and tone wheels.
  • ABS operation and diagnostic procedures.
  • Traction control-related braking functions.
  • ABS Diagnostic Trouble Codes and scan tool testing.
  • Hydraulic control unit and sensor replacement.

Power Steering & Steering Column

  • Hydraulic power steering system.
  • Steering pump, steering gear, and related components.
  • Steering column and steering linkage.
  • Power steering diagnosis and servicing.
  • Dedicated power steering information for the 2.5L VM diesel engine.

Battery, Starter & Charging Systems

  • Battery inspection, charging, and load testing.
  • Battery discharge and ignition-off current draw diagnosis.
  • Starter motor, starter relay, and solenoid testing.
  • Alternator and electronic voltage regulator.
  • Charging system electrical tests.
  • Starting system service procedures for petrol and diesel engines.

Instrument Panel & Dashboard Systems

  • Instrument cluster and dashboard components.
  • Speedometer, tachometer, fuel gauge, and temperature gauge.
  • Odometer and transmission range indicators.
  • Instrument cluster self-diagnostics and calibration.
  • Body Control Module (BCM).
  • Dashboard switches, warning lights, and message center.

Audio, Lighting & Electrical Accessories

  • Vehicle audio system servicing.
  • Horn and warning chime systems.
  • Headlights, rear lights, and turn signals.
  • Hazard warning lights and exterior lighting components.
  • Windshield wiper and washer systems.
  • Rear window defogger and electrically heated equipment.
  • Overhead console and accessory circuits.

Power Windows, Door Locks & Mirrors

  • Electric window control systems.
  • Power door lock mechanisms and controls.
  • Electrically adjustable exterior mirrors.
  • Power seat electrical equipment.
  • Electrical component inspection and repair.

Vehicle Security & Safety Restraints

  • Vehicle Theft Security System (VTSS).
  • Security-related electronic controls.
  • Airbag and occupant restraint system servicing.
  • Restraint system components and diagnostic information.

Bodywork, Doors & Interior Components

  • Body panel servicing and repair.
  • Sliding door and related components.
  • Windshield, side glass, and rear window replacement.
  • Vehicle body trim and interior equipment.
  • Body hardware, seals, and associated mechanisms.
  • Paint finish and body repair information.

Heating, Ventilation & Air Conditioning

  • Heating and air conditioning system operation.
  • Front and rear HVAC equipment.
  • Air conditioning components and controls.
  • Heater and ventilation system diagnosis.
  • HVAC removal, installation, and service procedures.

Electrical Wiring Diagrams — Power Distribution

  • Complete Wiring Diagrams section.
  • Vehicle power distribution circuits.
  • Junction block and fuse connections.
  • Electrical ground distribution.
  • Charging and starting system wiring.
  • Fuel injection, ignition, and transmission control circuits.

Electrical Wiring Diagrams — Brakes, Safety & Controls

  • ABS electrical circuits.
  • Vehicle speed control wiring.
  • Theft security system connections.
  • Airbag system wiring.
  • Body Control Module (BCM) circuits.
  • Instrument cluster and message center wiring.

Electrical Wiring Diagrams — Body Equipment

  • Front and rear lighting circuits.
  • Turn signal and hazard warning wiring.
  • Windshield wiper and washer circuits.
  • Air conditioning and heating electrical diagrams.
  • Audio system wiring.
  • Power windows, door locks, mirrors, and seats.
  • Interior lighting, window defoggers, and overhead console.
  • Trailer towing electrical connections.

Connector Pinouts & Electrical Component Locations

  • Electrical component index.
  • Detailed connector pinout information.
  • Connector and ground locations.
  • Wiring splice identification and locations.
  • Electrical circuit tracing and troubleshooting references.

Scheduled Maintenance & Workshop Specifications

  • Petrol and diesel engine maintenance schedules.
  • Engine oil, lubricants, and fluid capacities.
  • Routine inspection and maintenance procedures.
  • Vehicle lifting, towing, and jump-starting instructions.
  • Mechanical and electrical service specifications.
  • Tightening torques and special workshop tools.

Drivetrain Service & Mechanical Overhaul

Dealing with fluid leakage from the torque converter housing or a slipping low/reverse band on the 41TE transaxle requires digging deep into the heavy mechanical assemblies of these classic vans. Diagnosing hydraulic faults or physical drivetrain wear in these older vehicles without accurate factory data often leads to costly mistakes.

When you are dropping the subframe cradle to extract an A-598 transaxle, you need exact reference points. One frequent mistake during reassembly on these AWD platforms is improperly setting the differential bearing preload or misaligning the output flange shim on the Power Transfer Unit (PTU). A deviation of just a few thousandths of an inch here will rapidly lead to accelerated bearing wear and a distinct, whining gear noise at highway speeds. This technical document arms you with the precise mechanical teardown instructions, hydraulic flow diagrams, and physical adjustment procedures to rebuild these units correctly the first time.

Powertrain Clearances and Internal Tolerances

The engine lineup for the 1996-2000 generation—spanning from the 2.0L SOHC and 2.4L DOHC up to the 3.0L Mitsubishi 6G72, the 3.3L/3.8L V6s, and the robust 2.5L VM Motori diesel—requires absolute discipline during major block services. A common issue technicians encounter is stripping the aluminum threads on the water pump housing or cylinder head because they guessed the tightening sequence.

In many engine rebuild cases, ignoring the exact camshaft end-play measurements or piston-to-cylinder bore clearances results in poor compression and heavy oil consumption. By leveraging this workshop reference, you gain immediate access to the exact plastigage procedures for main and rod bearings, valve guide height specifications, and cylinder liner installation parameters. The documentation even covers the mechanical timing protocols and valve stand-down measurements specifically required for the diesel variant.

Chassis Alignment and Hydraulic Braking Stability

Keeping a heavy minivan tracking straight and stopping safely relies entirely on the physical integrity of its undercarriage. You will find exhaustive repair guides detailing the replacement of MacPherson strut assemblies, front suspension cradle bushings, and rear leaf spring mounts.

For stopping power, the resource completely bypasses electrical diagnostics to focus purely on the hydraulic and mechanical functionality of the braking system. You get step-by-step guidance on overhauling the master cylinder, testing the height-sensing proportioning valves, and properly bleeding the Teves Mark-20 hydraulic control unit. If you need to re-machine the brake rotors or adjust the rear drum shoes, the factory runout limits and wear specifications are clearly outlined.

Cabin Infrastructure and Mechanical Access

Beyond the drivetrain, aging vehicles suffer from worn physical mechanisms throughout the body. Whether you are dealing with binding sliding door tracks, failed mechanical lumbar supports in the bucket seats, or a jammed HVAC blend-air door, forcing parts apart usually breaks brittle 90s plastics. This guide illustrates the exact physical disassembly required to remove the heater A/C distribution housing, extract the evaporator core, and align the sliding door hinges without inflicting collateral damage on the interior trim.

Instant Shop-Floor Access & Delivery Guarantee

Grabbing your factory data shouldn't involve waiting for a delivery truck. Complete your transaction using Apple Pay, Google Pay, PayPal, or any major Credit Card, and a secure download link will immediately hit your inbox while simultaneously populating in your customer account.

  • Access Terms: Your file remains active and accessible for 10 days (or up to 10 successful downloads), giving you ample time to save the 2,022-page, fully searchable PDF to your shop tough-book or tablet.
  • Backup Delivery: If a sudden garage power loss drops your connection mid-transfer, our backup Dropbox delivery protocol ensures your data is never lost.
  • Download Video Guide: Not entirely sure how the retrieval process operates? See it in action right here: https://servicemanuals.info/How-to-Download.mp4.

Get immediate access to the full service manual and start rebuilding with factory-level precision today.

Frequently Asked Questions

I need to set the differential bearing preload on a 41TE automatic transaxle. Does this resource cover the exact shim selection process?
Yes, the documentation dives deep into the mechanical overhaul of the 41TE. It provides the specific charts for determining output gear bearing shim thickness, transfer shaft bearing adjustments, and the exact physical procedures required to measure and set the differential bearing preload correctly.

What kind of mechanical data is available for the 2.5L VM Motori turbo diesel engine?
The guide is incredibly thorough regarding the mechanical integrity of the 2.5L diesel. It covers critical block work such as cylinder liner removal and installation, piston ring gap specifications, mechanical fuel injection pump timing, and hydraulic tappet disassembly.

Can this help me physically dismantle the rear heater core and blend-air doors?
Absolutely. The HVAC section provides detailed, step-by-step mechanical disassembly instructions for the rear A/C and heater distribution housing. It shows you exactly how to safely remove the blower motor wheel, the mode doors, and the evaporator assembly without cracking the surrounding casing.